Skip to content
The People's CodeSearch
Menu

Changes to the Code

H.R. 3115 · Assault Weapons Ban of 2025 ·

In committee · step 2 of 5

Sections are cited like “7 U.S.C. § 2012”: 7 of the , 2012.

18 U.S.C. § 921 Definitions

+418 −0Shown
More for 18 U.S.C. § 921
Read § 921Only this section
2 changes the bill asks for here, 2 carried out
  1. Carried out:

    Section 921(a) of title 18, United States Code, is amended by adding at the end the following:(38) The term “semiautomatic pistol” means any repeating pistol that— (A) utilizes a portion of the energy of a firing cartridge to extract the fired cartridge case and chamber the next round; and (B) requires a separate pull of the trigger to fire each cartridge. (39) The term …

    The section already has a provision under this letter or number, so it would have two.

  2. Carried out:

    Section 921(a) of title 18, United States Code, as amended by this Act, is amended by adding at the end the following:(42) The term “barrel shroud”— (A) means a shroud that is attached to, or partially or completely encircles, the barrel of a firearm so that the shroud protects the user of the firearm from heat generated by the barrel; and (B) does not include— (i) a slide that partially or …

This bill puts a provision under a letter or number this section already uses, so the section would have two. The law has probably changed since the bill was written.

§ 921(a)–(b)

Start of § 921 to (a)(38)(B) unchanged ·

(i) the receipt of the communication; and

(ii) the electronic communication address to which the communication is sent.

(38) [inserted: The term “semiautomatic pistol” means any repeating pistol that—]

(A) [inserted: utilizes a portion of the energy of a firing cartridge to extract the fired cartridge case and chamber the next round; and]

(B) [inserted: requires a separate pull of the trigger to fire each cartridge.]

(39) [inserted: The term “semiautomatic shotgun” means any repeating shotgun that—]

(A) [inserted: utilizes a portion of the energy of a firing shell to extract the fired shell casing and chamber the next round; and]

(B) [inserted: requires a separate pull of the trigger to fire each shell.]

(40) [inserted: The term “semiautomatic assault weapon” means any of the following, regardless of country of manufacture or caliber of ammunition accepted:]

(A) [inserted: A semiautomatic rifle that—]

(i) [inserted: has the capacity to accept a detachable ammunition feeding device; and]

(ii) [inserted: has any 1 of the following:]

(I) [inserted: A pistol grip.]

(II) [inserted: A forward grip.]

(III) [inserted: A folding, telescoping, or detachable stock, or a stock that is otherwise foldable or adjustable in a manner that operates to reduce the length, size, or any other dimension, or otherwise enhances the concealability, of the weapon.]

(IV) [inserted: A grenade launcher.]

(V) [inserted: A barrel shroud.]

(VI) [inserted: A threaded barrel.]

(B) [inserted: A semiautomatic rifle that has a fixed ammunition feeding device with the capacity to accept more than 15 rounds, except for an attached tubular device designed to accept, and capable of operating only with, .22 caliber rimfire ammunition.]

(C) [inserted: Any part, combination of parts, component, device, attachment, or accessory that is designed or functions to accelerate the rate of fire of a semiautomatic firearm but not convert the semiautomatic firearm into a machinegun.]

(D) [inserted: A semiautomatic pistol that—]

(i) [inserted: has an ammunition feeding device that is not a fixed ammunition feeding device; and]

(ii) [inserted: has any 1 of the following:]

(I) [inserted: A threaded barrel.]

(II) [inserted: A second pistol grip.]

(III) [inserted: A barrel shroud.]

(IV) [inserted: The capacity to accept a detachable ammunition feeding device at some location outside of the pistol grip.]

(V) [inserted: A semiautomatic version of an automatic firearm.]

(VI) [inserted: A manufactured weight of 50 ounces or more when unloaded.]

(VII) [inserted: A buffer tube, stabilizing brace or similar component that protrudes horizontally behind the pistol grip, and is designed or redesigned to allow or facilitate a firearm to be fired from the shoulder.]

(E) [inserted: A semiautomatic pistol with a fixed ammunition feeding device that has the capacity to accept more than 15 rounds.]

(F) [inserted: A semiautomatic shotgun that—]

(i) [inserted: has the capacity to accept a detachable ammunition feeding device or a fixed ammunition feeding device that has the capacity to accept more than 5 rounds; and]

(ii) [inserted: has any 1 of the following:]

(I) [inserted: A folding, telescoping, or detachable stock.]

(II) [inserted: A pistol grip or bird’s head grip.]

(III) [inserted: A forward grip.]

(IV) [inserted: A grenade launcher.]

(G) [inserted: Any shotgun with a revolving cylinder.]

(H) [inserted: All of the following rifles, copies, duplicates, variants, or altered facsimiles with the capability of any such weapon thereof:]

(i) [inserted: All AK types, including the following:]

(I) [inserted: AK, AK47, AK47S, AK–74, AKM, AKS, ARM, MAK90, MISR, NHM90, NHM91, Rock River Arms LAR–47, SA85, SA93, Vector Arms AK–47, VEPR, WASR–10, and WUM.]

(II) [inserted: IZHMASH Saiga AK.]

(III) [inserted: MAADI AK47 and ARM.]

(IV) [inserted: Norinco 56S, 56S2, 84S, and 86S.]

(V) [inserted: Poly Technologies AK47 and AKS.]

(VI) [inserted: SKS with a detachable ammunition feeding device.]

(ii) [inserted: All AR types, including the following:]

(I) [inserted: AR–10.]

(II) [inserted: AR–15.]

(III) [inserted: Alexander Arms Overmatch Plus 16.]

(IV) [inserted: Armalite M15 22LR Carbine.]

(V) [inserted: Armalite M15–T.]

(VI) [inserted: Barrett REC7.]

(VII) [inserted: Beretta AR–70.]

(VIII) [inserted: Black Rain Ordnance Recon Scout.]

(IX) [inserted: Bushmaster ACR.]

(X) [inserted: Bushmaster Carbon 15.]

(XI) [inserted: Bushmaster MOE series.]

(XII) [inserted: Bushmaster XM15.]

(XIII) [inserted: Chiappa Firearms MFour rifles.]

(XIV) [inserted: Colt Match Target rifles.]

(XV) [inserted: CORE Rifle Systems CORE15 rifles.]

(XVI) [inserted: Daniel Defense M4A1 rifles.]

(XVII) [inserted: Devil Dog Arms 15 Series rifles.]

(XVIII) [inserted: Diamondback DB15 rifles.]

(XIX) [inserted: DoubleStar AR rifles.]

(XX) [inserted: DPMS Tactical rifles.]

(XXI) [inserted: DSA Inc. ZM–4 Carbine.]

(XXII) [inserted: Heckler & Koch MR556.]

(XXIII) [inserted: High Standard HSA–15 rifles.]

(XXIV) [inserted: Jesse James Nomad AR–15 rifle.]

(XXV) [inserted: Knight’s Armament SR–15.]

(XXVI) [inserted: Lancer L15 rifles.]

(XXVII) [inserted: MGI Hydra Series rifles.]

(XXVIII) [inserted: Mossberg MMR Tactical rifles.]

(XXIX) [inserted: Noreen Firearms BN 36 rifle.]

(XXX) [inserted: Olympic Arms.]

(XXXI) [inserted: POF USA P415.]

(XXXII) [inserted: Precision Firearms AR rifles.]

(XXXIII) [inserted: Remington R–15 rifles.]

(XXXIV) [inserted: Rhino Arms AR rifles.]

(XXXV) [inserted: Rock River Arms LAR–15.]

(XXXVI) [inserted: Sig Sauer SIG516 rifles and MCX rifles.]

(XXXVII) [inserted: Smith & Wesson M&P15 rifles.]

(XXXVIII) [inserted: Stag Arms AR rifles.]

(XXXIX) [inserted: Sturm, Ruger & Co. SR556 and AR–556 rifles.]

(XL) [inserted: Uselton Arms Air-Lite M–4 rifles.]

(XLI) [inserted: Windham Weaponry AR rifles.]

(XLII) [inserted: WMD Guns Big Beast.]

(XLIII) [inserted: Yankee Hill Machine Company, Inc. YHM–15 rifles.]

(iii) [inserted: Barrett M107A1.]

(iv) [inserted: Barrett M82A1.]

(v) [inserted: Beretta CX4 Storm.]

(vi) [inserted: Calico Liberty Series.]

(vii) [inserted: CETME Sporter.]

(viii) [inserted: Daewoo K–1, K–2, Max 1, Max 2, AR 100, and AR 110C.]

(ix) [inserted: Fabrique Nationale/FN Herstal FAL, LAR, 22 FNC, 308 Match, L1A1 Sporter, PS90, SCAR, and FS2000.]

(x) [inserted: Feather Industries AT–9.]

(xi) [inserted: Galil Model AR and Model ARM.]

(xii) [inserted: Hi-Point Carbine.]

(xiii) [inserted: HK–91, HK–93, HK–94, HK–PSG–1, and HK USC.]

(xiv) [inserted: IWI TAVOR, Galil ACE rifle.]

(xv) [inserted: Kel-Tec Sub-2000, SU–16, and RFB.]

(xvi) [inserted: SIG AMT, SIG PE–57, Sig Sauer SG 550, Sig Sauer SG 551, and SIG MCX.]

(xvii) [inserted: Springfield Armory SAR–48.]

(xviii) [inserted: Steyr AUG.]

(xix) [inserted: Sturm, Ruger & Co. Mini-14 Tactical Rifle M–14/20CF.]

(xx) [inserted: All Thompson rifles, including the following:]

(I) [inserted: Thompson M1SB.]

(II) [inserted: Thompson T1100D.]

(III) [inserted: Thompson T150D.]

(IV) [inserted: Thompson T1B.]

(V) [inserted: Thompson T1B100D.]

(VI) [inserted: Thompson T1B50D.]

(VII) [inserted: Thompson T1BSB.]

(VIII) [inserted: Thompson T1–C.]

(IX) [inserted: Thompson T1D.]

(X) [inserted: Thompson T1SB.]

(XI) [inserted: Thompson T5.]

(XII) [inserted: Thompson T5100D.]

(XIII) [inserted: Thompson TM1.]

(XIV) [inserted: Thompson TM1C.]

(xxi) [inserted: UMAREX UZI rifle.]

(xxii) [inserted: UZI Mini Carbine, UZI Model A Carbine, and UZI Model B Carbine.]

(xxiii) [inserted: Valmet M62S, M71S, and M78.]

(xxiv) [inserted: Vector Arms UZI Type.]

(xxv) [inserted: Weaver Arms Nighthawk.]

(xxvi) [inserted: Wilkinson Arms Linda Carbine.]

(I) [inserted: All of the following pistols, copies, duplicates, variants, or altered facsimiles with the capability of any such weapon thereof:]

(i) [inserted: All AK types, including the following:]

(I) [inserted: Centurion 39 AK pistol.]

(II) [inserted: CZ Scorpion pistol.]

(III) [inserted: Draco AK–47 pistol.]

(IV) [inserted: HCR AK–47 pistol.]

(V) [inserted: IO Inc. Hellpup AK–47 pistol.]

(VI) [inserted: Krinkov pistol.]

(VII) [inserted: Mini Draco AK–47 pistol.]

(VIII) [inserted: PAP M92 pistol.]

(IX) [inserted: Yugo Krebs Krink pistol.]

(ii) [inserted: All AR types, including the following:]

(I) [inserted: American Spirit AR–15 pistol.]

(II) [inserted: Bushmaster Carbon 15 pistol.]

(III) [inserted: Chiappa Firearms M4 Pistol GEN II.]

(IV) [inserted: CORE Rifle Systems CORE15 Roscoe pistol.]

(V) [inserted: Daniel Defense MK18 pistol.]

(VI) [inserted: DoubleStar Corporation AR pistol.]

(VII) [inserted: DPMS AR–15 pistol.]

(VIII) [inserted: Jesse James Nomad AR–15 pistol.]

(IX) [inserted: Olympic Arms AR–15 pistol.]

(X) [inserted: Osprey Armament MK–18 pistol.]

(XI) [inserted: POF USA AR pistols.]

(XII) [inserted: Rock River Arms LAR 15 pistol.]

(XIII) [inserted: Uselton Arms Air-Lite M–4 pistol.]

(iii) [inserted: Calico pistols.]

(iv) [inserted: DSA SA58 PKP FAL pistol.]

(v) [inserted: Encom MP–9 and MP–45.]

(vi) [inserted: Heckler & Koch model SP–89 pistol.]

(vii) [inserted: Intratec AB–10, TEC–22 Scorpion, TEC–9, and TEC–DC9.]

(viii) [inserted: IWI Galil Ace pistol, UZI PRO pistol.]

(ix) [inserted: Kel-Tec PLR 16 pistol.]

(x) [inserted: All MAC types, including the following:]

(I) [inserted: MAC–10.]

(II) [inserted: MAC–11.]

(III) [inserted: Masterpiece Arms MPA A930 Mini Pistol, MPA460 Pistol, MPA Tactical Pistol, and MPA Mini Tactical Pistol.]

(IV) [inserted: Military Armament Corp. Ingram M–11.]

(V) [inserted: Velocity Arms VMAC.]

(xi) [inserted: Sig Sauer P556 pistol.]

(xii) [inserted: Sites Spectre.]

(xiii) [inserted: All Thompson types, including the following:]

(I) [inserted: Thompson TA510D.]

(II) [inserted: Thompson TA5.]

(xiv) [inserted: All UZI types, including Micro-UZI.]

(J) [inserted: All of the following shotguns, copies, duplicates, variants, or altered facsimiles with the capability of any such weapon thereof:]

(i) [inserted: DERYA Anakon MC–1980, Anakon SD12.]

(ii) [inserted: Doruk Lethal shotguns.]

(iii) [inserted: Franchi LAW–12 and SPAS 12.]

(iv) [inserted: All IZHMASH Saiga 12 types, including the following:]

(I) [inserted: IZHMASH Saiga 12.]

(II) [inserted: IZHMASH Saiga 12S.]

(III) [inserted: IZHMASH Saiga 12S EXP–01.]

(IV) [inserted: IZHMASH Saiga 12K.]

(V) [inserted: IZHMASH Saiga 12K–030.]

(VI) [inserted: IZHMASH Saiga 12K–040 Taktika.]

(v) [inserted: Streetsweeper.]

(vi) [inserted: Striker 12.]

(K) [inserted: All belt-fed semiautomatic firearms, including TNW M2HB and FN M2495.]

(L) [inserted: Any combination of parts from which a firearm described in subparagraphs (A) through (K) can be assembled.]

(M) [inserted: The frame or receiver of a rifle or shotgun described in subparagraph (G), (H), (J), or (K).]

(41) [inserted: The term “large capacity ammunition feeding device”—]

(A) [inserted: means a magazine, belt, drum, feed strip, or similar device, including any such device joined or coupled with another in any manner, that has an overall capacity of, or that can be readily restored, changed, or converted to accept, more than 15 rounds of ammunition; and]

(B) [inserted: does not include an attached tubular device designed to accept, and capable of operating only with, .22 caliber rimfire ammunition.]

(42) [inserted: The term “barrel shroud”—]

(A) [inserted: means a shroud that is attached to, or partially or completely encircles, the barrel of a firearm so that the shroud protects the user of the firearm from heat generated by the barrel; and]

(B) [inserted: does not include—]

(i) [inserted: a slide that partially or completely encloses the barrel; or]

(ii) [inserted: an extension of the stock along the bottom of the barrel which does not encircle or substantially encircle the barrel.]

(43) [inserted: The term “detachable ammunition feeding device” means an ammunition feeding device that can be removed from a firearm without disassembly of the firearm action.]

(44) [inserted: The term “fixed ammunition feeding device” means an ammunition feeding device that is contained in and not removable from or is permanently fixed to the firearm, but does not include an attached tubular device designed to accept, and capable of operating only with, .22 caliber rimfire ammunition.]

(45) [inserted: The term “folding, telescoping, or detachable stock” means a stock that folds, telescopes, detaches or otherwise operates to reduce the length, size, or any other dimension, or otherwise enhances the concealability, of a firearm.]

(46) [inserted: The term “forward grip” means a grip located forward of the trigger that functions as a pistol grip.]

(47) [inserted: The term “grenade launcher” means an attachment for use on a firearm that is designed to propel a grenade or other similar destructive device.]

(48) [inserted: The term “permanently inoperable” means a firearm which is incapable of discharging a shot by means of an explosive and incapable of being readily restored to a firing condition.]

(49) [inserted: The term “pistol grip” means a grip, a thumbhole stock or Thordsen-type grip or stock, or any other characteristic that can function as a grip.]

(50) [inserted: The term “threaded barrel” means a feature or characteristic that is designed in such a manner to allow for the attachment of a device such as a firearm silencer or a flash suppressor.]

(51) [inserted: The term “qualified law enforcement officer” has the meaning given the term in section 926B.]

(52) [inserted: The term “grandfathered semiautomatic assault weapon” means any semiautomatic assault weapon the importation, possession, sale, or transfer of which would be unlawful under section 922(v) but for the exception under paragraph (2) of such section.]

(53) [inserted: The term “belt-fed semiautomatic firearm” means any repeating firearm that—]

(A) [inserted: utilizes a portion of the energy of a firing cartridge to extract the fired cartridge case and chamber the next round;]

(B) [inserted: requires a separate pull of the trigger to fire each cartridge; and]

(C) [inserted: has the capacity to accept a belt ammunition feeding device.]

(b) For the purposes of this chapter, a member of the Armed Forces on active duty is a resident of the State in which his permanent duty station is located.

18 U.S.C. § 922 Unlawful acts

+193 −167Shown
More for 18 U.S.C. § 922
Read § 922Only this section
9 changes the bill asks for here, 9 carried out
  1. Carried out:

    by inserting after subsection (u) the following:(v) (1) It shall be unlawful for a person to import, sell, manufacture, transfer, or possess, in or affecting interstate or foreign commerce, a semiautomatic assault weapon. (2) Paragraph (1) shall not apply to the possession, sale, or transfer of any semiautomatic assault …

    The section already has a provision under this letter or number, so it would have two.

  2. Carried out:

    by adding at the end the following:(aa) Secure storage or safety device requirement for grandfathered semiautomatic assault weapons.— It shall be unlawful for any person, other than a licensed importer, licensed manufacturer, or licensed dealer, to store or keep under the dominion or control of that person any …

  3. Carried out:

    Section 922 of title 18, United States Code, is amended by adding at the end the following:.

  4. Carried out:

    by repealing subsection (s);

  5. Carried out:

    by redesignating subsection (t) as subsection (s);

  6. Carried out:

    in paragraph (3)(C)(ii), by striking (as defined in subsection (s)(8)); and

  7. Carried out:

    by adding at the end the following:(7) In this subsection, the term “chief law enforcement officer” means the chief of police, the sheriff, or an equivalent officer or the designee of any such individual.; and

  8. Carried out:

    by inserting after subsection (s), as redesignated, the following:(t) (1) Beginning on the date that is 90 days after the date of enactment of the Assault Weapons Ban of 2025, it shall be unlawful for any person who is not licensed under this chapter to transfer a grandfathered semiautomatic assault weapon to any other person who is not …

  9. Carried out:

    Section 922(y)(2) of title 18, United States Code, is amended, in the matter preceding subparagraph (A), by striking , (g)(5)(B), and (s)(3)(B)(v)(II) and inserting and (g)(5)(B).

This bill puts a provision under a letter or number this section already uses, so the section would have two. The law has probably changed since the bill was written.

§ 922(r)–(x)

Start of § 922 to (r) unchanged ·

(1) the assembly of any such rifle or shotgun for sale or distribution by a licensed manufacturer to the United States or any department or agency thereof or to any State or any department, agency, or political subdivision thereof; or

(2) the assembly of any such rifle or shotgun for the purposes of testing or experimentation authorized by the Attorney General.

[struck: (s)]

[struck: (1)] [struck: Beginning on the date that is 90 days after the date of enactment of this subsection and ending on the day before the date that is 60 months after such date of enactment, it shall be unlawful for any licensed importer, licensed manufacturer, or licensed dealer to sell, deliver, or transfer a handgun (other than the return of a handgun to the person from whom it was received) to an individual who is not licensed under section 923, unless—]

[struck: (A)] [struck: after the most recent proposal of such transfer by the transferee—]

[struck: (i)] [struck: the transferor has—]

[struck: (I)] [struck: received from the transferee a statement of the transferee containing the information described in paragraph (3);]

[struck: (II)] [struck: verified the identity of the transferee by examining the identification document presented;]

[struck: (III)] [struck: within 1 day after the transferee furnishes the statement, provided notice of the contents of the statement to the chief law enforcement officer of the place of residence of the transferee; and]

[struck: (IV)] [struck: within 1 day after the transferee furnishes the statement, transmitted a copy of the statement to the chief law enforcement officer of the place of residence of the transferee; and]

[struck: (ii)]

[struck: (I)] [struck: 5 business days (meaning days on which State offices are open) have elapsed from the date the transferor furnished notice of the contents of the statement to the chief law enforcement officer, during which period the transferor has not received information from the chief law enforcement officer that receipt or possession of the handgun by the transferee would be in violation of Federal, State, or local law; or]

[struck: (II)] [struck: the transferor has received notice from the chief law enforcement officer that the officer has no information indicating that receipt or possession of the handgun by the transferee would violate Federal, State, or local law;]

[struck: (B)] [struck: the transferee has presented to the transferor a written statement, issued by the chief law enforcement officer of the place of residence of the transferee during the 10-day period ending on the date of the most recent proposal of such transfer by the transferee, stating that the transferee requires access to a handgun because of a threat to the life of the transferee or of any member of the household of the transferee;]

[struck: (C)]

[struck: (i)] [struck: the transferee has presented to the transferor a permit that—]

[struck: (I)] [struck: allows the transferee to possess or acquire a handgun; and]

[struck: (II)] [struck: was issued not more than 5 years earlier by the State in which the transfer is to take place; and]

[struck: (ii)] [struck: the law of the State provides that such a permit is to be issued only after an authorized government official has verified that the information available to such official does not indicate that possession of a handgun by the transferee would be in violation of the law;]

[struck: (D)] [struck: the law of the State requires that, before any licensed importer, licensed manufacturer, or licensed dealer completes the transfer of a handgun to an individual who is not licensed under section 923, an authorized government official verify that the information available to such official does not indicate that possession of a handgun by the transferee would be in violation of law;]

[struck: (E)] [struck: the Attorney General has approved the transfer under section 5812 of the Internal Revenue Code of 1986; or]

[struck: (F)] [struck: on application of the transferor, the Attorney General has certified that compliance with subparagraph (A)(i)(III) is impracticable because—]

[struck: (i)] [struck: the ratio of the number of law enforcement officers of the State in which the transfer is to occur to the number of square miles of land area of the State does not exceed 0.0025;]

[struck: (ii)] [struck: the business premises of the transferor at which the transfer is to occur are extremely remote in relation to the chief law enforcement officer; and]

[struck: (iii)] [struck: there is an absence of telecommunications facilities in the geographical area in which the business premises are located.]

[struck: (2)] [struck: A chief law enforcement officer to whom a transferor has provided notice pursuant to paragraph (1)(A)(i)(III) shall make a reasonable effort to ascertain within 5 business days whether receipt or possession would be in violation of the law, including research in whatever State and local recordkeeping systems are available and in a national system designated by the Attorney General.]

[struck: (3)] [struck: The statement referred to in paragraph (1)(A)(i)(I) shall contain only—]

[struck: (A)] [struck: the name, address, and date of birth appearing on a valid identification document (as defined in section 1028(d)(1) 4) of the transferee containing a photograph of the transferee and a description of the identification used;]

[struck: (B)] [struck: a statement that the transferee—]

[struck: (i)] [struck: is not under indictment for, and has not been convicted in any court of, a crime punishable by imprisonment for a term exceeding 1 year, and has not been convicted in any court of a misdemeanor crime of domestic violence;]

[struck: (ii)] [struck: is not a fugitive from justice;]

[struck: (iii)] [struck: is not an unlawful user of or addicted to any controlled substance (as defined in section 102 of the Controlled Substances Act);]

[struck: (iv)] [struck: has not been adjudicated as a mental defective or been committed to a mental institution;]

[struck: (v)] [struck: is not an alien who—]

[struck: (I)] [struck: is illegally or unlawfully in the United States; or]

[struck: (II)] [struck: subject to subsection (y)(2), has been admitted to the United States under a nonimmigrant visa (as that term is defined in section 101(a)(26) of the Immigration and Nationality Act (8 U.S.C. 1101(a)(26)));]

[struck: (vi)] [struck: has not been discharged from the Armed Forces under dishonorable conditions; and]

[struck: (vii)] [struck: is not a person who, having been a citizen of the United States, has renounced such citizenship;]

[struck: (C)] [struck: the date the statement is made; and]

[struck: (D)] [struck: notice that the transferee intends to obtain a handgun from the transferor.]

[struck: (4)] [struck: Any transferor of a handgun who, after such transfer, receives a report from a chief law enforcement officer containing information that receipt or possession of the handgun by the transferee violates Federal, State, or local law shall, within 1 business day after receipt of such request, communicate any information related to the transfer that the transferor has about the transfer and the transferee to—]

[struck: (A)] [struck: the chief law enforcement officer of the place of business of the transferor; and]

[struck: (B)] [struck: the chief law enforcement officer of the place of residence of the transferee.]

[struck: (5)] [struck: Any transferor who receives information, not otherwise available to the public, in a report under this subsection shall not disclose such information except to the transferee, to law enforcement authorities, or pursuant to the direction of a court of law.]

[struck: (6)]

[struck: (A)] [struck: Any transferor who sells, delivers, or otherwise transfers a handgun to a transferee shall retain the copy of the statement of the transferee with respect to the handgun transaction, and shall retain evidence that the transferor has complied with subclauses (III) and (IV) of paragraph (1)(A)(i) with respect to the statement.]

[struck: (B)] [struck: Unless the chief law enforcement officer to whom a statement is transmitted under paragraph (1)(A)(i)(IV) determines that a transaction would violate Federal, State, or local law—]

[struck: (i)] [struck: the officer shall, within 20 business days after the date the transferee made the statement on the basis of which the notice was provided, destroy the statement, any record containing information derived from the statement, and any record created as a result of the notice required by paragraph (1)(A)(i)(III);]

[struck: (ii)] [struck: the information contained in the statement shall not be conveyed to any person except a person who has a need to know in order to carry out this subsection; and]

[struck: (iii)] [struck: the information contained in the statement shall not be used for any purpose other than to carry out this subsection.]

[struck: (C)] [struck: If a chief law enforcement officer determines that an individual is ineligible to receive a handgun and the individual requests the officer to provide the reason for such determination, the officer shall provide such reasons to the individual in writing within 20 business days after receipt of the request.]

[struck: A chief law enforcement officer or other person responsible for providing criminal history background information pursuant to this subsection shall not be liable in an action at law for damages—]

[struck: (A)] [struck: for failure to prevent the sale or transfer of a handgun to a person whose receipt or possession of the handgun is unlawful under this section; or]

[struck: (B)] [struck: for preventing such a sale or transfer to a person who may lawfully receive or possess a handgun.]

[struck: (8)] [struck: For purposes of this subsection, the term “chief law enforcement officer” means the chief of police, the sheriff, or an equivalent officer or the designee of any such individual.]

[struck: (9)] [struck: The Attorney General shall take necessary actions to ensure that the provisions of this subsection are published and disseminated to licensed dealers, law enforcement officials, and the public.]

[struck: (t)] [inserted: (s)]

(1) Beginning on the date that is 30 days after the Attorney General notifies licensees under section 103(d) of the Brady Handgun Violence Prevention Act that the national instant criminal background check system is established, a licensed importer, licensed manufacturer, or licensed dealer shall not transfer a firearm to any other person who is not licensed under this chapter, unless—

(A) before the completion of the transfer, the licensee contacts the national instant criminal background check system established under section 103 of that Act;

(B)

(i) the system provides the licensee with a unique identification number; or

(ii) subject to subparagraph (C), 3 business days (meaning a day on which State offices are open) have elapsed since the licensee contacted the system, and the system has not notified the licensee that the receipt of a firearm by such other person would violate subsection (g) or (n) of this section, or State, local, or Tribal law;

(C) in the case of a person less than 21 years of age, in addition to all other requirements of this chapter—

(i) the system provides the licensee with a unique identification number;

(ii) 3 business days (meaning a day on which State offices are open) have elapsed since the licensee contacted the system, and the system has not notified the licensee that cause exists to further investigate a possibly disqualifying juvenile record under subsection (d); or

(iii) in the case of such a person with respect to whom the system notifies the licensee in accordance with clause (ii) that cause exists to further investigate a possibly disqualifying juvenile record under subsection (d), 10 business days (meaning a day on which State offices are open) have elapsed since the licensee contacted the system, and the system has not notified the licensee that—

(I) transferring the firearm to the other person would violate subsection (d) of this section; or

(II) receipt of a firearm by the other person would violate subsection (g) or (n) of this section, or State, local, or Tribal law; and

(D) the transferor has verified the identity of the transferee by examining a valid identification document (as defined in section 1028(d) of this title) of the transferee containing a photograph of the transferee.

(2) If transfer or receipt of a firearm would not violate subsection (d), (g), or (n) (as applicable) or State, local or Tribal law, the system shall—

(A) assign a unique identification number to the transfer;

(B) provide the licensee with the number; and

(C) destroy all records of the system with respect to the call (other than the identifying number and the date the number was assigned) and all records of the system relating to the person or the transfer.

(3) Paragraph (1) shall not apply to a firearm transfer between a licensee and another person if—

(A)

(i) such other person has presented to the licensee a permit that—

(I) allows such other person to possess or acquire a firearm; and

(II) was issued not more than 5 years earlier by the State in which the transfer is to take place; and

(ii) the law of the State provides that such a permit is to be issued only after an authorized government official has verified that the information available to such official does not indicate that possession of a firearm by such other person would be in violation of law;

(B) the Attorney General has approved the transfer under section 5812 of the Internal Revenue Code of 1986; or

(C) on application of the transferor, the Attorney General has certified that compliance with paragraph (1)(A) is impracticable because—

(i) the ratio of the number of law enforcement officers of the State in which the transfer is to occur to the number of square miles of land area of the State does not exceed 0.0025;

(ii) the business premises of the licensee at which the transfer is to occur are extremely remote in relation to the chief law enforcement officer [struck: (as defined in subsection (s)(8))]; and

(iii) there is an absence of telecommunications facilities in the geographical area in which the business premises are located.

(4) If the national instant criminal background check system notifies the licensee that the information available to the system does not demonstrate that the transfer of a firearm to or receipt of a firearm by such other person would violate subsection (d), (g), or (n) (as applicable) or State5 local, or Tribal law, and the licensee transfers a firearm to such other person, the licensee shall include in the record of the transfer the unique identification number provided by the system with respect to the transfer.

(5) If the licensee knowingly transfers a firearm to such other person and knowingly fails to comply with paragraph (1) of this subsection with respect to the transfer and, at the time such other person most recently proposed the transfer, the national instant criminal background check system was operating and information was available to the system demonstrating that transfer of a firearm to or receipt of a firearm by such other person would violate subsection (d), (g), or (n) (as applicable) of this section or State 5 local, or Tribal law, the Attorney General may, after notice and opportunity for a hearing, suspend for not more than 6 months or revoke any license issued to the licensee under section 923, and may impose on the licensee a civil fine of not more than $5,000.

(6) Neither a local government nor an employee of the Federal Government or of any State or local government, responsible for providing information to the national instant criminal background check system shall be liable in an action at law for damages—

(A) for failure to prevent the sale or transfer of a firearm to a person whose receipt or possession of the firearm is unlawful under this section; or

(B) for preventing such a sale or transfer to a person who may lawfully receive or possess a firearm.

(7) [inserted: In this subsection, the term “chief law enforcement officer” means the chief of police, the sheriff, or an equivalent officer or the designee of any such individual.]

(t)

(1) [inserted: Beginning on the date that is 90 days after the date of enactment of the Assault Weapons Ban of 2025, it shall be unlawful for any person who is not licensed under this chapter to transfer a grandfathered semiautomatic assault weapon to any other person who is not licensed under this chapter, unless a licensed importer, licensed manufacturer, or licensed dealer has first taken custody of the grandfathered semiautomatic assault weapon for the purpose of complying with subsection (s). Upon taking custody of the grandfathered semiautomatic assault weapon, the licensee shall comply with all requirements of this chapter as if the licensee were transferring the grandfathered semiautomatic assault weapon from the licensee’s inventory to the unlicensed transferee.]

(2) [inserted: Paragraph (1) shall not apply to a temporary transfer of possession for the purpose of participating in target shooting in a licensed target facility or established range if—]

(A) [inserted: the grandfathered semiautomatic assault weapon is, at all times, kept within the premises of the target facility or range; and]

(B) [inserted: the transferee is not known to be prohibited from possessing or receiving a grandfathered semiautomatic assault weapon.]

(3) [inserted: For purposes of this subsection, the term “transfer”—]

(A) [inserted: shall include a sale, gift, or loan; and]

(B) [inserted: does not include temporary custody of the grandfathered semiautomatic assault weapon for purposes of examination or evaluation by a prospective transferee.]

(4)

(A) [inserted: Notwithstanding any other provision of this chapter, the Attorney General may implement this subsection with regulations.]

(B) [inserted: Regulations promulgated under this paragraph—]

(i) [inserted: shall include a provision setting a maximum fee that may be charged by licensees for services provided in accordance with paragraph (1); and]

(ii) [inserted: shall not include any provision imposing recordkeeping requirements on any unlicensed transferor or requiring licensees to facilitate transfers in accordance with paragraph (1).]

(u) It shall be unlawful for a person to steal or unlawfully take or carry away from the person or the premises of a person who is licensed to engage in the business of importing, manufacturing, or dealing in firearms, any firearm in the licensee’s business inventory that has been shipped or transported in interstate or foreign commerce.

(v)

(1) [inserted: It shall be unlawful for a person to import, sell, manufacture, transfer, or possess, in or affecting interstate or foreign commerce, a semiautomatic assault weapon.]

(2) [inserted: Paragraph (1) shall not apply to the possession, sale, or transfer of any semiautomatic assault weapon otherwise lawfully possessed under Federal law on the date of enactment of the Assault Weapons Ban of 2025.]

(3) [inserted: Paragraph (1) shall not apply to any firearm that—]

(A) [inserted: is manually operated by bolt, pump, lever, or slide action, except for a shotgun described in section 921(a)(40)(G);]

(B) [inserted: has been rendered permanently inoperable;]

(C) [inserted: is an antique firearm, as defined in section 921 of this title; or]

(D) [inserted: is only capable of firing rimfire ammunition.]

(4) [inserted: Paragraph (1) shall not apply to—]

(A) [inserted: the importation for, manufacture for, sale to, transfer to, or possession by—]

(i) [inserted: the United States, or a department or agency of the United States; or]

(ii) [inserted: a State, or a department, agency, or political subdivision of a State;]

(B) [inserted: the sale to, transfer to, or possession by a qualified law enforcement officer employed by—]

(i) [inserted: the United States, or a department or agency of the United States; or]

(ii) [inserted: a State, or a department, agency, or political subdivision of a State,]

[inserted: for purposes of law enforcement (whether on or off duty);]

(C) [inserted: the sale to, transfer to, or possession by a campus law enforcement officer for purposes of law enforcement (whether on or off duty);]

(D) [inserted: the importation for, or sale or transfer to a licensee under title I of the Atomic Energy Act of 1954 for purposes of establishing and maintaining an on-site physical protection system and security organization required by Federal law, or possession by an employee or contractor of such licensee on-site for such purposes or off-site for purposes of licensee-authorized training or transportation of nuclear materials;]

(E) [inserted: the possession, by an individual who is retired in good standing from service with a law enforcement agency and is not otherwise prohibited from receiving a firearm, of a semiautomatic assault weapon—]

(i) [inserted: sold or transferred to the individual by the agency upon such retirement; or]

(ii) [inserted: that the individual purchased, or otherwise obtained, for official use before such retirement;]

(F) [inserted: the importation, sale, manufacture, transfer, or possession of a semiautomatic assault weapon by a licensed manufacturer or licensed importer for the purposes of testing or experimentation authorized by the Attorney General; or]

(G) [inserted: the importation, sale, manufacture, transfer, or possession of a firearm specified in Appendix A to this section, as such firearm was manufactured on the date of introduction of the Assault Weapons Ban of 2025.]

(5) [inserted: For purposes of paragraph (4)(C), the term “campus law enforcement officer” means an individual who is—]

(A) [inserted: employed by a private institution of higher education that is eligible for funding under title IV of the Higher Education Act of 1965 (20 U.S.C. 1070 et seq.);]

(B) [inserted: responsible for the prevention or investigation of crime involving injury to persons or property, including apprehension or detention of persons for such crimes;]

(C) [inserted: authorized by Federal, State, or local law to carry a firearm, execute search warrants, and make arrests; and]

(D) [inserted: recognized, commissioned, or certified by a government entity as a law enforcement officer.]

(6) [inserted: The Attorney General shall establish and maintain, in a timely manner, a record of the make, model, and, if available, date of manufacture of any semiautomatic assault weapon which the Attorney General is made aware has been used in relation to a crime under Federal or State law, and the nature and circumstances of the crime involved, including the outcome of relevant criminal investigations and proceedings. The Attorney General shall annually submit a copy of the record established under this paragraph to the Congress and make the record available to the general public.]

(w)

(1) [inserted: It shall be unlawful for a person to import, sell, manufacture, transfer, or possess, in or affecting interstate or foreign commerce, a large capacity ammunition feeding device.]

(2) [inserted: Paragraph (1) shall not apply to the possession of any large capacity ammunition feeding device otherwise lawfully possessed on or before the date of enactment of the Assault Weapons Ban of 2025.]

(3) [inserted: Paragraph (1) shall not apply to—]

(A) [inserted: the importation for, manufacture for, sale to, transfer to, or possession by—]

(i) [inserted: the United States, or a department or agency of the United States; or]

(ii) [inserted: a State, or a department, agency, or political subdivision of a State;]

(B) [inserted: the sale to, transfer to, or possession by a qualified law enforcement officer employed by—]

(i) [inserted: the United States, or a department or agency of the United States; or]

(ii) [inserted: a State, or a department, agency, or political subdivision of a State,]

[inserted: for purposes of law enforcement (whether on or off duty);]

(C) [inserted: the sale to, transfer to, or possession by a campus law enforcement officer for purposes of law enforcement (whether on or off duty);]

(D) [inserted: the importation for, or sale or transfer to a licensee under title I of the Atomic Energy Act of 1954 for purposes of establishing and maintaining an on-site physical protection system and security organization required by Federal law, or possession by an employee or contractor of such licensee on-site for such purposes or off-site for purposes of licensee-authorized training or transportation of nuclear materials;]

(E) [inserted: the possession, by an individual who is retired in good standing from service with a law enforcement agency and is not otherwise prohibited from receiving ammunition, of a large capacity ammunition feeding device—]

(i) [inserted: sold or transferred to the individual by the agency upon such retirement; or]

(ii) [inserted: that the individual purchased, or otherwise obtained, for official use before such retirement; or]

(F) [inserted: the importation, sale, manufacture, transfer, or possession of any large capacity ammunition feeding device by a licensed manufacturer or licensed importer for the purposes of testing or experimentation authorized by the Attorney General.]

(4) [inserted: For purposes of paragraph (4)(C), the term “campus law enforcement officer” means an individual who is—]

(A) [inserted: employed by a private institution of higher education that is eligible for funding under title IV of the Higher Education Act of 1965 (20 U.S.C. 1070 et seq.);]

(B) [inserted: responsible for the prevention or investigation of crime involving injury to persons or property, including apprehension or detention of persons for such crimes;]

(C) [inserted: authorized by Federal, State, or local law to carry a firearm, execute search warrants, and make arrests; and]

(D) [inserted: recognized, commissioned, or certified by a government entity as a law enforcement officer.]

[(v) , (w) Repealed. Pub. L. 103–322, title XI, § 110105(2), Sept. 13, 1994, 108 Stat. 2000.]

(x)

§ 922(y)Provisions Relating to Aliens Admitted Under Nonimmigrant Visas.—(1)–(2)

(x)(1)–(y)(1) unchanged ·

(B) the term “nonimmigrant visa” has the same meaning as in section 101(a)(26) of the Immigration and Nationality Act (8 U.S.C. 1101(a)(26)).

(2) Exceptions.— Subsections (d)(5)(B)[struck: ,][inserted: and] (g)(5)(B)[struck: ,] [struck: and (s)(3)(B)(v)(II) ]do not apply to any alien who has been lawfully admitted to the United States under a nonimmigrant visa, if that alien is—

(A) admitted to the United States for lawful hunting or sporting purposes or is in possession of a hunting license or permit lawfully issued in the United States;

(B) an official representative of a foreign government who is—

§ 922(z)–(aa)

(y)(2)(B)(i)–(z)(3)(C)(i) unchanged ·

(ii) shall not include an action brought against the person having lawful possession and control of the handgun for negligent entrustment or negligence per se.

[APPENDIX A Repealed. Pub. L. 103–322, title XI, § 110105(2), Sept. 13, 1994, 108 Stat. 2000]

(aa) [inserted: Secure storage or safety device requirement for grandfathered semiautomatic assault weapons.—] [inserted: It shall be unlawful for any person, other than a licensed importer, licensed manufacturer, or licensed dealer, to store or keep under the dominion or control of that person any grandfathered semiautomatic assault weapon that the person knows, or has reasonable cause to believe, will be accessible to an individual prohibited from receiving or possessing a firearm under subsection (g), (n), or (x), or any provision of State law, unless the grandfathered semiautomatic assault weapon is—]

(1) [inserted: carried on the person, or within such close proximity that the person can readily retrieve and use the grandfathered semiautomatic assault weapon as if the grandfathered semiautomatic assault weapon were carried on the person; or]

(2) [inserted: locked by a secure gun storage or safety device that the prohibited individual has no ability to access.]

18 U.S.C. § 923 Licensing

+1 −1Shown
More for 18 U.S.C. § 923
Read § 923Only this section
2 changes the bill asks for here, 2 carried out
  1. Carried out:

    Section 923(i) of title 18, United States Code, is amended by adding at the end the following: The serial number of any semiautomatic assault weapon manufactured after the date of enactment of the Assault Weapons Ban of 2025 shall clearly show the date on which the weapon was manufactured or made, legibly and conspicuously engraved or cast on the weapon, and such other identification as the Attorney General shall by regulations prescribe..

  2. Carried out:

    Section 923(i) of title 18, United States Code, as amended by this Act, is amended by adding at the end the following: A large capacity ammunition feeding device manufactured after the date of enactment of the Assault Weapons Ban of 2025 shall be identified by a serial number and the date on which the device was manufactured or made, legibly and conspicuously engraved or cast on the device, and such other identification as the Attorney General shall by regulations prescribe..

§ 923(h)–(l)

Start of § 923 to (g)(7) unchanged ·

(h) Licenses issued under the provisions of subsection (c) of this section shall be kept posted and kept available for inspection on the premises covered by the license.

(i) Licensed importers and licensed manufacturers shall identify by means of a serial number engraved or cast on the receiver or frame of the weapon, in such manner as the Attorney General shall by regulations prescribe, each firearm imported or manufactured by such importer or manufacturer.[inserted: The serial number of any semiautomatic assault weapon manufactured after the date of enactment of the Assault Weapons Ban of 2025 shall clearly show the date on which the weapon was manufactured or made, legibly and conspicuously engraved or cast on the weapon, and such other identification as the Attorney General shall by regulations prescribe. A large capacity ammunition feeding device manufactured after the date of enactment of the Assault Weapons Ban of 2025 shall be identified by a serial number and the date on which the device was manufactured or made, legibly and conspicuously engraved or cast on the device, and such other identification as the Attorney General shall by regulations prescribe.]

(j) A licensed importer, licensed manufacturer, or licensed dealer may, under rules or regulations prescribed by the Attorney General, conduct business temporarily at a location other than the location specified on the license if such temporary location is the location for a gun show or event sponsored by any national, State, or local organization, or any affiliate of any such organization devoted to the collection, competitive use, or other sporting use of firearms in the community, and such location is in the State which is specified on the license. Records of receipt and disposition of firearms transactions conducted at such temporary location shall include the location of the sale or other disposition and shall be entered in the permanent records of the licensee and retained on the location specified on the license. Nothing in this subsection shall authorize any licensee to conduct business in or from any motorized or towed vehicle. Notwithstanding the provisions of subsection (a) of this section, a separate fee shall not be required of a licensee with respect to business conducted under this subsection. Any inspection or examination of inventory or records under this chapter by the Attorney General at such temporary location shall be limited to inventory consisting of, or records relating to, firearms held or disposed at such temporary location. Nothing in this subsection shall be construed to authorize the Attorney General to inspect or examine the inventory or records of a licensed importer, licensed manufacturer, or licensed dealer at any location other than the location specified on the license. Nothing in this subsection shall be construed to diminish in any manner any right to display, sell, or otherwise dispose of firearms or ammunition, which is in effect before the date of the enactment of the Firearms Owners’ Protection Act, including the right of a licensee to conduct “curios or relics” firearms transfers and business away from their business premises with another licensee without regard as to whether the location of where the business is conducted is located in the State specified on the license of either licensee.

(k) Licensed importers and licensed manufacturers shall mark all armor piercing projectiles and packages containing such projectiles for distribution in the manner prescribed by the Attorney General by regulation. The Attorney General shall furnish information to each dealer licensed under this chapter defining which projectiles are considered armor piercing ammunition as defined in section 921(a)(17)(B).

(l) The Attorney General shall notify the chief law enforcement officer in the appropriate State and local jurisdictions of the names and addresses of all persons in the State to whom a firearms license is issued.

18 U.S.C. § 924 Penalties

+4 −4Shown
More for 18 U.S.C. § 924
Read § 924Only this section
6 changes the bill asks for here, 6 carried out
  1. Carried out:

    by inserting or large capacity ammunition feeding device after firearm or ammunition each time it appears;

  2. Carried out:

    by inserting or large capacity ammunition feeding device after firearms or ammunition each time it appears; and

  3. Carried out:

    by striking or (k) and inserting (k), (r), (v), or (w);

  4. Carried out:

    in paragraph (2)(C), by inserting or large capacity ammunition feeding devices after firearms or quantities of ammunition; and

  5. Carried out:

    in paragraph (3)(E), by inserting 922(r), 922(v), 922(w), after 922(n),.

  6. Carried out:

    Section 924(a)(1)(B) of title 18, United States Code, is amended by striking or (q) of section 922 and inserting (q), (r), (v), (w), or (aa) of section 922.

§ 924(a)(1)Except as otherwise provided in this subsection, subsection (b), (c), (f), or…(A)–(D)

Start of § 924 to (a)(1) unchanged ·

(A) knowingly makes any false statement or representation with respect to the information required by this chapter to be kept in the records of a person licensed under this chapter or in applying for any license or exemption or relief from disability under the provisions of this chapter;

(B) knowingly violates subsection (a)(4), (f), (k), [inserted: (q), (r), (v), (w), ]or ([struck: q][inserted: aa]) of section 922;

(C) knowingly imports or brings into the United States or any possession thereof any firearm or ammunition in violation of section 922(l); or

(D) willfully violates any other provision of this chapter,

§ 924(c)–(d)

(a)(1)–(c)(5) unchanged ·

(ii) if the killing is manslaughter (as defined in section 1112), be punished as provided in section 1112.

(d)

(1) Any firearm or ammunition [inserted: or large capacity ammunition feeding device ]involved in or used in any knowing violation of subsection (a)(4), (a)(6), (f), (g), (h), (i), (j), [inserted: (k), (r), (v), ]or ([struck: k][inserted: w]) of section 922, or knowing importation or bringing into the United States or any possession thereof any firearm or ammunition [inserted: or large capacity ammunition feeding device ]in violation of section 922(l), or knowing violation of section 924, 932, or 933, or willful violation of any other provision of this chapter or any rule or regulation promulgated thereunder, or any violation of any other criminal law of the United States, or any firearm or ammunition [inserted: or large capacity ammunition feeding device ]intended to be used in any offense referred to in paragraph (3) of this subsection, where such intent is demonstrated by clear and convincing evidence, shall be subject to seizure and forfeiture, and all provisions of the Internal Revenue Code of 1986 relating to the seizure, forfeiture, and disposition of firearms, as defined in section 5845(a) of that Code, shall, so far as applicable, extend to seizures and forfeitures under the provisions of this chapter: Provided, That upon acquittal of the owner or possessor, or dismissal of the charges against him other than upon motion of the Government prior to trial, or lapse of or court termination of the restraining order to which he is subject, the seized or relinquished firearms or ammunition [inserted: or large capacity ammunition feeding device ]shall be returned forthwith to the owner or possessor or to a person delegated by the owner or possessor unless the return of the firearms or ammunition [inserted: or large capacity ammunition feeding device ]would place the owner or possessor or his delegate in violation of law. Any action or proceeding for the forfeiture of firearms or ammunition [inserted: or large capacity ammunition feeding device ]shall be commenced within one hundred and twenty days of such seizure.

(2)

(A) In any action or proceeding for the return of firearms or ammunition seized under the provisions of this chapter, the court shall allow the prevailing party, other than the United States, a reasonable attorney’s fee, and the United States shall be liable therefor.

(B) In any other action or proceeding under the provisions of this chapter, the court, when it finds that such action was without foundation, or was initiated vexatiously, frivolously, or in bad faith, shall allow the prevailing party, other than the United States, a reasonable attorney’s fee, and the United States shall be liable therefor.

(C) Only those firearms or quantities of ammunition [inserted: or large capacity ammunition feeding devices ]particularly named and individually identified as involved in or used in any violation of the provisions of this chapter or any rule or regulation issued thereunder, or any other criminal law of the United States or as intended to be used in any offense referred to in paragraph (3) of this subsection, where such intent is demonstrated by clear and convincing evidence, shall be subject to seizure, forfeiture, and disposition.

(D) The United States shall be liable for attorneys’ fees under this paragraph only to the extent provided in advance by appropriation Acts.

(3) The offenses referred to in paragraphs (1) and (2)(C) of this subsection are—

§ 924(d)(3)The offenses referred to in paragraphs (1) and (2)(C) of this subsection…(D)–(G)

(d)(3)(A)–(C) unchanged ·

(D) any offense described in section 922(d) of this title where the firearm or ammunition is intended to be used in such offense by the transferor of such firearm or ammunition;

(E) any offense described in section 922(i), 922(j), 922(l), 922(n), [inserted: 922(r), 922(v), 922(w), ]or 924(b) of this title;

(F) any offense which may be prosecuted in a court of the United States which involves the exportation of firearms or ammunition; and

(G) any offense under section 932 or 933.

Rest of § 924 unchanged ·

18 U.S.C. § 925A Remedy for erroneous denial of firearm

+1 −1Shown
More for 18 U.S.C. § 925A
Read § 925AOnly this section
1 change the bill asks for here, 1 carried out
  1. Carried out:

    Section 925A of title 18, United States Code, is amended, in the matter preceding paragraph (1), by striking subsection (s) or (t) of section 922 and inserting section 922(s).

§ 925A(1)–(2)

§ 925A. Remedy for erroneous denial of firearm

Any person denied a firearm pursuant to [struck: subsection][inserted: section] [inserted: 922](s)[struck: or (t) of section 922]—

(1) due to the provision of erroneous information relating to the person by any State or political subdivision thereof, or by the national instant criminal background check system established under section 103 of the Brady Handgun Violence Prevention Act; or

(2) who was not prohibited from receipt of a firearm pursuant to subsection (g) or (n) of section 922,

may bring an action against the State or political subdivision responsible for providing the erroneous information, or responsible for denying the transfer, or against the United States, as the case may be, for an order directing that the erroneous information be corrected or that the transfer be approved, as the case may be. In any action under this section, the court, in its discretion, may allow the prevailing party a reasonable attorney’s fee as part of the costs.

34 U.S.C. § 10152 Description

+2 −0Shown
More for 34 U.S.C. § 10152
Read § 10152Only this section
1 change the bill asks for here, 1 carried out
  1. Carried out:

    Section 501(a)(1) of title I of the Omnibus Crime Control and Safe Streets Act of 1968 (34 U.S.C. 10152(a)(1)) is amended by adding at the end the following:(J) Compensation for surrendered semiautomatic assault weapons and large capacity ammunition feeding devices, as those terms are defined in section 921 of title 18, United States Code, under buy-back programs for semiautomatic assault weapons and large capacity ammunition feeding devices..

    The section already has a provision under this letter or number, so it would have two.

This bill puts a provision under a letter or number this section already uses, so the section would have two. The law has probably changed since the bill was written.

§ 10152(a)–(b)

Start of § 10152 to (a)(1)(I)(iv)(IV) unchanged ·

(J) Programs to purchase and operate unmanned aircraft systems (as defined in section 44801 of title 49) to benefit public safety.

(K) Programs to purchase and operate counter-UAS systems (as defined in section 44801 of title 49) included on the list of technologies established by subsection (d)(2)(A)(iii) section 124n(d)(2)(A)(iii) of title 6 to exercise the authority granted under subsection (a)(2) of such section.

(J) [inserted: Compensation for surrendered semiautomatic assault weapons and large capacity ammunition feeding devices, as those terms are defined in section 921 of title 18, United States Code, under buy-back programs for semiautomatic assault weapons and large capacity ammunition feeding devices.]

(2) Rule of construction Paragraph (1) shall be construed to ensure that a grant under that paragraph may be used for any purpose for which a grant was authorized to be used under either or both of the programs specified in section 10151(b) of this title, as those programs were in effect immediately before January 5, 2006.

(b) Contracts and subawards A State or unit of local government may, in using a grant under this part for purposes authorized by subsection (a), use all or a portion of that grant to contract with or make one or more subawards to one or more—

Rest of § 10152 unchanged ·

18 U.S.C. § 925B Reporting of background check denials to State authorities

Couldn't place the change
More for 18 U.S.C. § 925B
Read § 925BOnly this section

The bill's words for this section

  1. Not carried out:

    Section 925B of title 18, United States Code, is amended, in the matter preceding paragraph (1), by striking section 922(t) and inserting section 922(s).

    “section 922(t)” isn't in § 925B in the Code as we have it. The law may have changed since the bill was drafted.

    Technical detail“section 922(t)” not found in /us/usc/t18/s925B

Step through the changes