Skip to content
The People's CodeSearch
Menu

Changes to the Code

H.R. 4626 · Home Appliance Protection and Affordability Act ·

Passed the House · step 3 of 5

Sections are cited like “7 U.S.C. § 2012”: 7 of the , 2012.

42 U.S.C. § 6291 Definitions

+3 −3Shown
More for 42 U.S.C. § 6291
Read § 6291Only this section
3 changes the bill asks for here, 3 carried out
  1. Carried out:

    Section 321(1)(A) of the Energy Policy and Conservation Act (42 U.S.C. 6291(1)(A)) is amended by striking , with respect to showerheads, faucets, water closets, and urinals, water and inserting water, as applicable.

  2. Carried out:

    Section 321(6)(A) of the Energy Policy and Conservation Act (42 U.S.C. 6291(6)(A)) is amended by striking , or, in the case of showerheads, faucets, water closets, and urinals, water use, and inserting or water use, as applicable,.

  3. Carried out:

    Section 321(7) of the Energy Policy and Conservation Act (42 U.S.C. 6291(7)) is amended by striking in the case of showerheads, faucets, water closets, and urinals and inserting , as applicable.

§ 6291(1)

WhereMarkThe Code nowMarkAs the bill would leave it
§ 6291. Definitions§ 6291. Definitions
For purposes of this part:For purposes of this part:
(1)(1) (1)
The term “consumer product” means any article (other than an automobile, as defined in section 32901(a)(3) of title 49) of a type—The term “consumer product” means any article (other than an automobile, as defined in section 32901(a)(3) of title 49) of a type—
(1)(A)(A) (A)
which in operation consumes, or is designed to consume, energy [struck: or], [struck: with] [struck: respect to showerheads, faucets, water closets, and urinals, water]; andwhich in operation consumes, or is designed to consume, energy [inserted: orwater], [inserted: as] [inserted: applicable]; and
(1)(B)(B) (B)
which, to any significant extent, is distributed in commerce for personal use or consumption by individuals;which, to any significant extent, is distributed in commerce for personal use or consumption by individuals;
(1)without regard to whether such article of such type is in fact distributed in commerce for personal use or consumption by an individual, except that such term includes fluorescent lamp ballasts, general service fluorescent lamps, incandescent reflector lamps, showerheads, faucets, water closets, and urinals distributed in commerce for personal or commercial use or consumption.without regard to whether such article of such type is in fact distributed in commerce for personal use or consumption by an individual, except that such term includes fluorescent lamp ballasts, general service fluorescent lamps, incandescent reflector lamps, showerheads, faucets, water closets, and urinals distributed in commerce for personal or commercial use or consumption.

§ 6291(6)–(9)

(2)–(5) unchanged

WhereMarkThe Code nowMarkAs the bill would leave it
(6)(6) (6)
The term “energy conservation standard” means—The term “energy conservation standard” means—
(6)(A)(A) (A)
a performance standard which prescribes a minimum level of energy efficiency or a maximum quantity of energy [struck: use,] [struck: or, in the case of showerheads, faucets, ]water [struck: closets], [struck: and] [struck: urinals],[struck: water use, ]for a covered product, determined in accordance with test procedures prescribed under section 6293 of this title; ora performance standard which prescribes a minimum level of energy efficiency or a maximum quantity of energy [inserted: useor] water [inserted: use], [inserted: as] [inserted: applicable],for a covered product, determined in accordance with test procedures prescribed under section 6293 of this title; or
(6)(B)(B) (B)
a design requirement for the products specified in paragraphs (6), (7), (8), (10), (15), (16), (17), and (20) of section 6292(a) of this title; anda design requirement for the products specified in paragraphs (6), (7), (8), (10), (15), (16), (17), and (20) of section 6292(a) of this title; and
(6)includes any other requirements which the Secretary may prescribe under section 6295(r) of this title.includes any other requirements which the Secretary may prescribe under section 6295(r) of this title.
(7)(7) (7)
The term “estimated annual operating cost” means the aggregate retail cost of the energy which is likely to be consumed annually, and [struck: in the case of showerheads], [struck: faucets,] [struck: water closets], [struck: and urinals, ]the aggregate retail cost of water and wastewater treatment services likely to be incurred annually, in representative use of a consumer product, determined in accordance with section 6293 of this title.The term “estimated annual operating cost” means the aggregate retail cost of the energy which is likely to be consumed annually, and , [inserted: as] [inserted: applicable], the aggregate retail cost of water and wastewater treatment services likely to be incurred annually, in representative use of a consumer product, determined in accordance with section 6293 of this title.
(8)(8) (8)
The term “measure of energy consumption” means energy use, energy efficiency, estimated annual operating cost, or other measure of energy consumption.The term “measure of energy consumption” means energy use, energy efficiency, estimated annual operating cost, or other measure of energy consumption.
(9)(9) (9)
The term “class of covered products” means a group of covered products, the functions or intended uses of which are similar (as determined by the Secretary).The term “class of covered products” means a group of covered products, the functions or intended uses of which are similar (as determined by the Secretary).

Rest of § 6291 unchanged

42 U.S.C. § 6293 Test procedures

+4 −45 of 6 shown
More for 42 U.S.C. § 6293
Read § 6293Only this section
6 changes the bill asks for here, 5 carried out
  1. Carried out:

    Section 323(b)(3) of the Energy Policy and Conservation Act (42 U.S.C. 6293(b)(3)) is amended by striking energy efficiency, energy use, water use (in the case of showerheads, faucets, water closets and urinals) and inserting , as applicable, energy efficiency, energy use, water use.

  2. Carried out:

    by striking or, in the case of showerheads, faucets, water closets, or urinals, and inserting or, as applicable,; and

  3. Carried out:

    by striking or in the case of showerheads, faucets, water closets, or urinals, and inserting or, as applicable,.

  4. Not carried out:

    Section 323(c) of the Energy Policy and Conservation Act (42 U.S.C. 6293(c) is amended—

    We can't read how this instruction is worded yet, so it isn't shown in the text.

    Technical detailno-pattern: (REF is amended —
  5. Carried out:

    in paragraph (1), by striking or, in the case of showerheads, faucets, water closets, and urinals, and inserting or, as applicable,; and

  6. Carried out:

    in paragraph (2), by striking or, in the case of showerheads, faucets, water closets, and urinals, and inserting or, as applicable,.

§ 6293(b)Amended and new procedures(2)–(6)

Start of § 6293 to (b)(1)(C) unchanged

WhereMarkThe Code nowMarkAs the bill would leave it
(2)(2) (2)
If the Secretary determines, on his own behalf or in response to a petition by any interested person, that a test procedure should be prescribed or amended, the Secretary shall promptly publish in the Federal Register proposed test procedures and afford interested persons an opportunity to present oral and written data, views, and arguments with respect to such procedures. The comment period shall not be less than 60 days and may be extended for good cause shown to not more than 270 days. In prescribing or amending a test procedure, the Secretary shall take into account such information as the Secretary determines relevant to such procedure, including technological developments relating to energy use or energy efficiency of the type (or class) of covered products involved.If the Secretary determines, on his own behalf or in response to a petition by any interested person, that a test procedure should be prescribed or amended, the Secretary shall promptly publish in the Federal Register proposed test procedures and afford interested persons an opportunity to present oral and written data, views, and arguments with respect to such procedures. The comment period shall not be less than 60 days and may be extended for good cause shown to not more than 270 days. In prescribing or amending a test procedure, the Secretary shall take into account such information as the Secretary determines relevant to such procedure, including technological developments relating to energy use or energy efficiency of the type (or class) of covered products involved.
(3)(3) (3)
Any test procedures prescribed or amended under this section shall be reasonably designed to produce test results which measure energy efficiency, energy use, water use[struck: (in the case of showerheads], [struck: faucets, water closets and urinals), ]or estimated annual operating cost of a covered product during a representative average use cycle or period of use, as determined by the Secretary, and shall not be unduly burdensome to conduct.Any test procedures prescribed or amended under this section shall be reasonably designed to produce test results which measure [inserted: , as applicable, ]energy efficiency, energy use, water use, or estimated annual operating cost of a covered product during a representative average use cycle or period of use, as determined by the Secretary, and shall not be unduly burdensome to conduct.
(4)(4) (4)
If the test procedure is a procedure for determining estimated annual operating costs, such procedure shall provide that such costs shall be calculated from measurements of energy use or, [struck: in] [struck: the case of showerheads], [struck: faucets, ]water [struck: closets, or urinals, water ]use in a representative average use cycle or period of use, as determined by the Secretary, and from representative average unit costs of the energy needed to operate such product during such cycle, or[struck: in the case of showerheads], [struck: faucets,] [struck: water closets], [struck: or urinals, ]representative average unit costs of water and wastewater treatment service resulting from the operation of such products during such cycle. The Secretary shall provide information to manufacturers with respect to representative average unit costs of energy, water, and wastewater treatment.If the test procedure is a procedure for determining estimated annual operating costs, such procedure shall provide that such costs shall be calculated from measurements of energy use or, [inserted: as] [inserted: applicable], water use in a representative average use cycle or period of use, as determined by the Secretary, and from representative average unit costs of the energy needed to operate such product during such cycle, or, [inserted: as] [inserted: applicable], representative average unit costs of water and wastewater treatment service resulting from the operation of such products during such cycle. The Secretary shall provide information to manufacturers with respect to representative average unit costs of energy, water, and wastewater treatment.
(5)(5) (5)
With respect to fluorescent lamp ballasts manufactured on or after January 1, 1990, and to which standards are applicable under section 6295 of this title, the Secretary shall prescribe test procedures that are in accord with ANSI standard C82.2–1984 or other test procedures determined appropriate by the Secretary.With respect to fluorescent lamp ballasts manufactured on or after January 1, 1990, and to which standards are applicable under section 6295 of this title, the Secretary shall prescribe test procedures that are in accord with ANSI standard C82.2–1984 or other test procedures determined appropriate by the Secretary.
(6)(6) (6)
With respect to fluorescent lamps and incandescent reflector lamps to which standards are applicable under subsection (i) of section 6295 of this title, the Secretary shall prescribe test procedures, to be carried out by accredited test laboratories, that take into consideration the applicable IES or ANSI standard.With respect to fluorescent lamps and incandescent reflector lamps to which standards are applicable under subsection (i) of section 6295 of this title, the Secretary shall prescribe test procedures, to be carried out by accredited test laboratories, that take into consideration the applicable IES or ANSI standard.

§ 6293(c)–(d)

(b)(7)–(c)(1) unchanged

WhereMarkThe Code nowMarkAs the bill would leave it
(c)(1)(A)(A) (A)
in writing (including a representation on a label); orin writing (including a representation on a label); or
(c)(1)(B)(B) (B)
in any broadcast advertisement,in any broadcast advertisement,
(c)(1)with respect to the energy use or [struck: efficiency or], [struck: in] [struck: the case of showerheads], [struck: faucets, ]water [struck: closets, and urinals, water ]use of a covered product to which a test procedure is applicable under subsection (a) or the cost of energy consumed by such product, unless such product has been tested in accordance with such test procedure and such representation fairly discloses the results of such testing.with respect to the energy use or [inserted: efficiencyor], [inserted: as] [inserted: applicable], water use of a covered product to which a test procedure is applicable under subsection (a) or the cost of energy consumed by such product, unless such product has been tested in accordance with such test procedure and such representation fairly discloses the results of such testing.
(c)(2)(2) (2)
Effective 180 days after an amended or new test procedure applicable to a covered product is prescribed or established under subsection (b), no manufacturer, distributor, retailer, or private labeler may make any representation—Effective 180 days after an amended or new test procedure applicable to a covered product is prescribed or established under subsection (b), no manufacturer, distributor, retailer, or private labeler may make any representation—
(c)(2)(A)(A) (A)
in writing (including a representation on a label); orin writing (including a representation on a label); or
(c)(2)(B)(B) (B)
in any broadcast advertisement,in any broadcast advertisement,
(c)(2)with respect to energy use or [struck: efficiency or], [struck: in] [struck: the case of showerheads], [struck: faucets, ]water [struck: closets, and urinals, water ]use of such product or cost of energy consumed by such product, unless such product has been tested in accordance with such amended or new test procedures and such representation fairly discloses the results of such testing.with respect to energy use or [inserted: efficiencyor], [inserted: as] [inserted: applicable], water use of such product or cost of energy consumed by such product, unless such product has been tested in accordance with such amended or new test procedures and such representation fairly discloses the results of such testing.
(c)(3)(3) (3)
On the petition of any manufacturer, distributor, retailer, or private labeler, filed not later than the 60th day before the expiration of the period involved, the 180-day period referred to in paragraph (2) may be extended by the Secretary with respect to the petitioner (but in no event for more than an additional 180 days) if the Secretary determines that the requirements of paragraph (2) would impose an undue hardship on such petitioner.On the petition of any manufacturer, distributor, retailer, or private labeler, filed not later than the 60th day before the expiration of the period involved, the 180-day period referred to in paragraph (2) may be extended by the Secretary with respect to the petitioner (but in no event for more than an additional 180 days) if the Secretary determines that the requirements of paragraph (2) would impose an undue hardship on such petitioner.
(d)(d) Case in which test procedure is not required(d) Case in which test procedure is not required

Rest of § 6293 unchanged

42 U.S.C. § 6295 Energy conservation standards

+165 −6716 of 18 shown
More for 42 U.S.C. § 6295
Read § 6295Only this section
18 changes the bill asks for here, 16 carried out
  1. Carried out:

    Section 325(m)(1) of the Energy Policy and Conservation Act (42 U.S.C. 6295(m)(1)) is amended to read as follows:(1) In general.— The Secretary may, for any product, publish a notice of proposed rulemaking including new proposed standards for such product based on the criteria established under subsection (o) and the procedures established under subsection (p)..

  2. Carried out:

    Section 325(m)(3) of the Energy Policy and Conservation Act (42 U.S.C. 6295(m)(3)) is amended to read as follows:(3) Amendment of standard.— Not later than 2 years after a notice is issued under paragraph (1), the Secretary shall publish a final rule amending the standard for the product..

  3. Carried out:

    Section 325(m)(4) of the Energy Policy and Conservation Act (42 U.S.C. 6295(m)(4)) is amended to read as follows:(4) Application to products.— An amendment prescribed under this subsection shall apply to a product that is manufactured after the date that is 5 years after publication of the final rule establishing an applicable standard..

  4. Not carried out:

    in the subsection heading, by striking an amended standard and inserting amendment or revocation of standard;

    “an amended standard” isn't in § 6295(n) in the Code as we have it. The law may have changed since the bill was drafted.

    Technical detail“an amended standard” not found in /us/usc/t42/s6295/n
  5. Carried out:

    in paragraph (1), by inserting or revoked after should be amended;

  6. Carried out:

    by amending paragraph (2) to read as follows:(2) The Secretary shall grant a petition to determine if standards for a covered product should be amended or revoked if the Secretary finds that such petition contains evidence, assuming no other evidence were considered, that such standards— (A) result in additional costs to …

  7. Not carried out:

    by striking New or amended standards. and inserting New, amended, or revoked standards.;

    “New or amended standards.” isn't in § 6295(n)(4) in the Code as we have it. The law may have changed since the bill was drafted.

    Technical detail“New or amended standards.” not found in /us/usc/t42/s6295/n/4
  8. Carried out:

    by redesignating subparagraphs (A) and (B) as clauses (i) and (ii), respectively (and by conforming the margins accordingly);

  9. Carried out:

    by striking Not later than 3 years and inserting the following:(A) Not later than 3 years; and

  10. Carried out:

    by adding at the end the following:(B) Not later than 180 days after the date of granting a petition to revoke standards, the Secretary shall publish in the Federal Register— (i) a final rule revoking the standards; or (ii) a determination that it is not necessary to revoke the standards. (C) The grant of a …

  11. Carried out:

    in paragraph (5)(B), by striking 3 years (for refrigerators, refrigerator-freezers, and freezers, room air conditioners, dishwashers, clothes washers, clothes dryers, fluorescent lamp ballasts, general service fluorescent lamps, incandescent reflector lamps, and kitchen ranges and ovens) or 5 years (for central air conditioners and heat pumps, water heaters, pool heaters, direct heating equipment and furnaces) and inserting 5 years;

  12. Carried out:

    Section 325(o) of the Energy Policy and Conservation Act (42 U.S.C. 6295(o)) is amended by amending paragraphs (2) and (3) to read as follows:(2) Requirements.— (A) Design.— Any new or amended energy conservation standard prescribed by the Secretary under this section for any type (or class) of covered product shall be designed to achieve the maximum improvement in, as applicable, energy efficiency or water …

  13. Carried out:

    Section 325(o)(6)(E)(ii) of the Energy Policy and Conservation Act (42 U.S.C. 6295(o)(6)(E)(ii)) is amended by striking shall apply to any such product installed on or after the effective date of the standard in States in which the Secretary has designated the standard to apply and inserting shall apply, in States in which the Secretary has designated the standard to apply, to any such product that is manufactured or imported into the United States on or after the effective date of the standard.

  14. Carried out:

    Section 325(o)(1) of the Energy Policy and Conservation Act is amended by striking , or, in the case of showerheads, faucets, water closets, or urinals, and inserting , or, as applicable,.

  15. Carried out:

    Section 325(o)(6)(D)(i)(II) of the Energy Policy and Conservation Act (42 U.S.C. 6295(o)(6)(D)(i)(II)) is amended by striking this paragraph and inserting this subsection.

  16. Carried out:

    Section 325(p)(2)(A) of the Energy Policy and Conservation Act (42 U.S.C. 6295(p)(2)(A)) is amended by striking taking into account those factors which the Secretary must consider under subsection (o)(2) and inserting as determined in accordance with subsection (o).

  17. Carried out:

    in paragraph (9)(B), by adding at the end the following:(iii) Other amendments to standards.— The Secretary may prescribe a new or amended energy conservation standard for clothes washers in accordance with this section, including— (I) a design requirement; and (II) a performance standard which prescribes one of the following: (aa) A …

  18. Carried out:

    in paragraph (10)(B), by adding at the end the following:(iii) Other amendments to standards.— The Secretary may prescribe a new or amended energy conservation standard for dishwashers in accordance with this section, including— (I) a design requirement; and (II) a performance standard which prescribes one of the following: (aa) A …

§ 6295(g)Standards for dishwashers; clothes washers; clothes dryers; fluorescent lamp ballasts(9)–(10)

Start of § 6295 to (g)(9)(B) unchanged

WhereMarkThe Code nowMarkAs the bill would leave it
(9)(B)(i)(i) In general.—(i) In general.—
Not later than December 31, 2011, the Secretary shall publish a final rule determining whether to amend the standards in effect for clothes washers manufactured on or after January 1, 2015.Not later than December 31, 2011, the Secretary shall publish a final rule determining whether to amend the standards in effect for clothes washers manufactured on or after January 1, 2015.
(9)(B)(ii)(ii) Amended standards.—(ii) Amended standards.—
The final rule shall contain any amended standards.The final rule shall contain any amended standards.
(9)(B)(iii)(iii) [inserted: Other amendments to standards.—]
[inserted: The Secretary may prescribe a new or amended energy conservation standard for clothes washers in accordance with this section, including—]
(9)(B)(iii)(I)(I) [inserted: ]
[inserted: a design requirement; and]
(9)(B)(iii)(II)(II) [inserted: ]
[inserted: a performance standard which prescribes one of the following:]
(9)(B)(iii)(II)(aa)(aa) [inserted: ]
[inserted: A minimum level of energy efficiency.]
(9)(B)(iii)(II)(bb)(bb) [inserted: ]
[inserted: A maximum quantity of energy use.]
(9)(B)(iii)(II)(cc)(cc) [inserted: ]
[inserted: A minimum level of water efficiency.]
(9)(B)(iii)(II)(dd)(dd) [inserted: ]
[inserted: A maximum quantity of water use.]
(9)(B)(iii)(II)(ee)(ee) [inserted: ]
[inserted: A minimum level of energy efficiency and a minimum level of water efficiency.]
(9)(B)(iii)(II)(ff)(ff) [inserted: ]
[inserted: A maximum quantity of energy use and a maximum quantity of water use.]
(10)(10) Residential dishwashers manufactured on or after january 1, 2010.—(10) Residential dishwashers manufactured on or after january 1, 2010.—
(10)(A)(A) In general.—(A) In general.—
A dishwasher manufactured on or after January 1, 2010, shall—A dishwasher manufactured on or after January 1, 2010, shall—

§ 6295(g)–(h)

(g)(10)(A)(i)–(B) unchanged

WhereMarkThe Code nowMarkAs the bill would leave it
(g)(10)(B)(i)(i) In general.—(i) In general.—
Not later than January 1, 2015, the Secretary shall publish a final rule determining whether to amend the standards for dishwashers manufactured on or after January 1, 2018.Not later than January 1, 2015, the Secretary shall publish a final rule determining whether to amend the standards for dishwashers manufactured on or after January 1, 2018.
(g)(10)(B)(ii)(ii) Amended standards.—(ii) Amended standards.—
The final rule shall contain any amended standards.The final rule shall contain any amended standards.
(g)(10)(B)(iii)(iii) [inserted: Other amendments to standards.—]
[inserted: The Secretary may prescribe a new or amended energy conservation standard for dishwashers in accordance with this section, including—]
(g)(10)(B)(iii)(I)(I) [inserted: ]
[inserted: a design requirement; and]
(g)(10)(B)(iii)(II)(II) [inserted: ]
[inserted: a performance standard which prescribes one of the following:]
(g)(10)(B)(iii)(II)(aa)(aa) [inserted: ]
[inserted: A minimum level of energy efficiency.]
(g)(10)(B)(iii)(II)(bb)(bb) [inserted: ]
[inserted: A maximum quantity of energy use.]
(g)(10)(B)(iii)(II)(cc)(cc) [inserted: ]
[inserted: A minimum level of water efficiency.]
(g)(10)(B)(iii)(II)(dd)(dd) [inserted: ]
[inserted: A maximum quantity of water use.]
(g)(10)(B)(iii)(II)(ee)(ee) [inserted: ]
[inserted: A minimum level of energy efficiency and a minimum level of water efficiency.]
(g)(10)(B)(iii)(II)(ff)(ff) [inserted: ]
[inserted: A maximum quantity of energy use and a maximum quantity of water use.]
(h)(h) Standards for kitchen ranges and ovens(h) Standards for kitchen ranges and ovens
(h)(1)(1) (1)
Gas kitchen ranges and ovens having an electrical supply cord shall not be equipped with a constant burning pilot for products manufactured on or after January 1, 1990.Gas kitchen ranges and ovens having an electrical supply cord shall not be equipped with a constant burning pilot for products manufactured on or after January 1, 1990.

§ 6295(l)–(o)

(h)(2)–(l)(4) unchanged

WhereMarkThe Code nowMarkAs the bill would leave it
(l)(4)(I)(ii)(ii) Backstop requirement.—(ii) Backstop requirement.—
If the Secretary imposes a backstop requirement as a result of a failure to complete an accelerated rulemaking in accordance with clause (i)(II) of any of subparagraphs (D) through (G),4 the requirement to collect and model data for the applicable type of lamp shall continue for an additional 2 years after the effective date of the backstop requirement.If the Secretary imposes a backstop requirement as a result of a failure to complete an accelerated rulemaking in accordance with clause (i)(II) of any of subparagraphs (D) through (G),4 the requirement to collect and model data for the applicable type of lamp shall continue for an additional 2 years after the effective date of the backstop requirement.
(m)(m) Amendment of standards(m) Amendment of standards
(m)(1)(1) In general(1) In general[inserted: .—]
[inserted: The Secretary may, for any product, publish a notice of proposed rulemaking including new proposed standards for such product based on the criteria established under subsection (o) and the procedures established under subsection (p).]
[struck: Not later than 6 years after issuance of any final rule establishing or amending a standard, as required for a product under this part, the Secretary shall publish—]
(m)(1)(A)(A) [struck: ]
[struck: a notice of the determination of the Secretary that standards for the product do not need to be amended, based on the criteria established under subsection (n)(2); or]
(m)(1)(B)(B) [struck: ]
[struck: a notice of proposed rulemaking including new proposed standards based on the criteria established under subsection (o) and the procedures established under subsection (p).]
(m)(2)(2) Notice(2) Notice
If the Secretary publishes a notice under paragraph (1), the Secretary shall—If the Secretary publishes a notice under paragraph (1), the Secretary shall—
(m)(2)(A)(A) (A)
publish a notice stating that the analysis of the Department is publicly available; andpublish a notice stating that the analysis of the Department is publicly available; and
(m)(2)(B)(B) (B)
provide an opportunity for written comment.provide an opportunity for written comment.
(m)(3)(3) Amendment of standard[struck: ; new determination](3) Amendment of standard[inserted: .—]
[inserted: Not later than 2 years after a notice is issued under paragraph (1), the Secretary shall publish a final rule amending the standard for the product.]
(m)(3)(A)(A) [struck: Amendment of standard]
[struck: Not later than 2 years after a notice is issued under paragraph (1)(B), the Secretary shall publish a final rule amending the standard for the product.]
(m)(3)(B)(B) [struck: New determination]
[struck: Not later than 3 years after a determination under paragraph (1)(A), the Secretary shall make a new determination and publication under subparagraph (A) or (B) of paragraph (1).]
(m)(4)(4) Application to products(4) Application to products[inserted: .—]
[inserted: An amendment prescribed under this subsection shall apply to a product that is manufactured after the date that is 5 years after publication of the final rule establishing an applicable standard.]
(m)(4)(A)(A) [struck: In general]
[struck: Except as provided in subparagraph (B), an amendment prescribed under this subsection shall apply to—]
(m)(4)(A)(i)(i) [struck: ]
[struck: with respect to refrigerators, refrigerator-freezers, freezers, room air conditioners, dishwashers, clothes washers, clothes dryers, fluorescent lamp ballasts, and kitchen ranges and ovens, such a product that is manufactured after the date that is 3 years after publication of the final rule establishing an applicable standard; and]
(m)(4)(A)(ii)(ii) [struck: ]
[struck: with respect to central air conditioners, heat pumps, water heaters, pool heaters, direct heating equipment, and furnaces, such a product that is manufactured after the date that is 5 years after publication of the final rule establishing an applicable standard.]
(m)(4)(B)(B) [struck: Other new standards]
[struck: A manufacturer shall not be required to apply new standards to a product with respect to which other new standards have been required during the prior 6-year period.]
(m)(5)(5) Reports(5) Reports
The Secretary shall promptly submit to the Committee on Energy and Commerce of the House of Representatives and the Committee on Energy and Natural Resources of the Senate—The Secretary shall promptly submit to the Committee on Energy and Commerce of the House of Representatives and the Committee on Energy and Natural Resources of the Senate—
(m)(5)(A)(A) (A)
a progress report every 180 days on compliance with this section, including a specific plan to remedy any failures to comply with deadlines for action established under this section; anda progress report every 180 days on compliance with this section, including a specific plan to remedy any failures to comply with deadlines for action established under this section; and
(m)(5)(B)(B) (B)
all required reports to the Court or to any party to the Consent Decree in State of New York v Bodman, Consolidated Civil Actions No. 05 Civ. 7807 and No. 05 Civ. 7808.all required reports to the Court or to any party to the Consent Decree in State of New York v Bodman, Consolidated Civil Actions No. 05 Civ. 7807 and No. 05 Civ. 7808.
(n)(n) Petition for amended standard(n) Petition for amended standard
(n)(1)(1) (1)
With respect to each covered product described in paragraphs (1) through (11), and in paragraphs (13) and (14) of section 6292(a) of this title, any person may petition the Secretary to conduct a rulemaking to determine for a covered product if the standards contained either in the last final rule required under subsections (b) through (i) of this section or in a final rule published under this section should be amended.With respect to each covered product described in paragraphs (1) through (11), and in paragraphs (13) and (14) of section 6292(a) of this title, any person may petition the Secretary to conduct a rulemaking to determine for a covered product if the standards contained either in the last final rule required under subsections (b) through (i) of this section or in a final rule published under this section should be amended[inserted: or revoked].
(n)(2)(2) (2)
The Secretary shall grant a petition if [struck: he] finds that [struck: it] contains evidence[struck: which], assuming no other evidence were considered, [struck: provides] [struck: an] [struck: adequate basis for amending the ]standards[struck: under the following criteria]—The Secretary shall grant a petition [inserted: to determine ]if [inserted: standards] [inserted: for a covered product should be amended or revoked if the Secretary ]finds that [inserted: such] [inserted: petition ]contains evidence, assuming no other evidence were considered, [inserted: that] [inserted: such] standards—
(n)(2)(A)(A) (A)
[struck: amended standards will ]result in [struck: significant] [struck: conservation] [struck: of] [struck: energy];result in [inserted: additional] [inserted: costs] [inserted: to] [inserted: consumers];
(n)(2)(B)(B) (B)
[struck: amended] [struck: standards] [struck: are] [struck: technologically] [struck: feasible;] [struck: and][inserted: do] [inserted: not] [inserted: result] [inserted: in] [inserted: significant] [inserted: conservation of energy or water;]
(n)(2)(C)(C) (C)
[struck: amended standards ]are [struck: cost] [struck: effective] [struck: as] [struck: described in subsection (o)(2)(B)(i)(II).]are [inserted: not] [inserted: technologically] [inserted: feasible;] [inserted: and]
(n)(2)(D)(D) [inserted: ]
[inserted: result in such covered product not being commercially available in the United States to all consumers.]
(n)(2)[struck: The grant of a petition by the Secretary under this subsection creates no presumption with respect to the Secretary’s determination of any of the criteria in a rulemaking under this section.]
(n)(3)(3) Notice of decision.—(3) Notice of decision.—
Not later than 180 days after the date of receiving a petition, the Secretary shall publish in the Federal Register a notice of, and explanation for, the decision of the Secretary to grant or deny the petition.Not later than 180 days after the date of receiving a petition, the Secretary shall publish in the Federal Register a notice of, and explanation for, the decision of the Secretary to grant or deny the petition.
(n)(4)(4) New or amended standards.—(4) New or amended standards.—
(n)(4)(A)(A) [inserted: ]
[inserted: Not later than 3 years after the date of granting a petition for new or amended standards, the Secretary shall publish in the Federal Register—]
(n)(4)[struck: Not later than 3 years after the date of granting a petition for new or amended standards, the Secretary shall publish in the Federal Register—]
(n)(4)(A)(i)[struck: (A)] [inserted: (i)]
a final rule that contains the new or amended standards; ora final rule that contains the new or amended standards; or
(n)(4)(A)(ii)[struck: (B)] [inserted: (ii)]
a determination that no new or amended standards are necessary.a determination that no new or amended standards are necessary.
(n)(4)(B)(B) [inserted: ]
[inserted: Not later than 180 days after the date of granting a petition to revoke standards, the Secretary shall publish in the Federal Register—]
(n)(4)(B)(i)(i) [inserted: ]
[inserted: a final rule revoking the standards; or]
(n)(4)(B)(ii)(ii) [inserted: ]
[inserted: a determination that it is not necessary to revoke the standards.]
(n)(4)(C)(C) [inserted: ]
[inserted: The grant of a petition by the Secretary under this subsection creates no presumption with respect to the Secretary’s determination of any of the criteria in a rulemaking under this section.]
(n)(4)(D)(D) [inserted: ]
[inserted: Standards that have been revoked pursuant to subparagraph (B) shall be considered to be in effect for purposes of section 327.]
(n)(5)(5) (5)
An amendment prescribed under this subsection shall apply to products manufactured after a date which is 5 years after—An amendment prescribed under this subsection shall apply to products manufactured after a date which is 5 years after—
(n)(5)(A)(A) (A)
the effective date of the previous amendment pursuant to this part; orthe effective date of the previous amendment pursuant to this part; or
(n)(5)(B)(B) (B)
if the previous final rule published under this part did not amend the standard, the earliest date by which a previous amendment could have been in effect, except that in no case may an amended standard apply to products manufactured within [struck: 3 years (for refrigerators, refrigerator-freezers, and freezers, room air conditioners, dishwashers, clothes washers, clothes dryers, fluorescent lamp ballasts, general service fluorescent lamps, incandescent reflector lamps, and kitchen ranges and ovens) or ]5 years [struck: (for central air conditioners and heat pumps, water heaters, pool heaters, direct heating equipment and furnaces) ]after publication of the final rule establishing a standard.if the previous final rule published under this part did not amend the standard, the earliest date by which a previous amendment could have been in effect, except that in no case may an amended standard apply to products manufactured within 5 years after publication of the final rule establishing a standard.
(o)(o) Criteria for prescribing new or amended standards(o) Criteria for prescribing new or amended standards
(o)(1)(1) (1)
The Secretary may not prescribe any amended standard which increases the maximum allowable energy use, or, [struck: in] [struck: the case of showerheads],[struck: faucets, ]water [struck: closets, or urinals, water ]use, or decreases the minimum required energy efficiency, of a covered product.The Secretary may not prescribe any amended standard which increases the maximum allowable energy use, or, [inserted: as] [inserted: applicable],water use, or decreases the minimum required energy efficiency, of a covered product.
(o)(2)(2) (2) [inserted: Requirements.—]
(o)(2)(A)(A) (A) [inserted: Design.—]
Any new or amended energy conservation standard prescribed by the Secretary under this section for any type (or class) of covered product shall be designed to achieve the maximum improvement in[struck: energy efficiency], [struck: or,] [struck: in the case of showerheads], [struck: faucets,] [struck: water] [struck: closets, ]or [struck: urinals, ]water efficiency, which the Secretary determines is technologically feasible and economically justified.Any new or amended energy conservation standard prescribed by the Secretary under this section for any type (or class) of covered product shall be designed to achieve the maximum improvement in, [inserted: as] [inserted: applicable], [inserted: energy] [inserted: efficiency] or water efficiency, which the Secretary determines is technologically feasible and economically justified.
(o)(2)(B)(B) (B) [inserted: Test procedures.—]
[inserted: If the Secretary determines that a test procedure should be prescribed or amended in accordance with section 323 for a type (or class) of covered product, the Secretary may not prescribe a new or amended energy conservation standard under this section for such type (or class) of covered product unless the Secretary has prescribed or amended (and published in the Federal Register) a test procedure for such type (or class) of covered product at least 180 days before publishing a notice of proposed rulemaking with respect to the new or amended energy conservation standard.]
(o)(2)(C)(C) [inserted: Significant conservation.—]
[inserted: The Secretary may not prescribe a new or amended energy conservation standard under this section for a type (or class) of covered product if the Secretary determines that the establishment and imposition of such energy conservation standard will not result in significant conservation of, as applicable, energy or water.]
(o)(2)(D)(D) [inserted: Technologically feasible and economically justified.—]
[inserted: The Secretary may not prescribe a new or amended energy conservation standard under this section for a type (or class) of covered product unless the Secretary determines that the establishment and imposition of such energy conservation standard is technologically feasible and economically justified.]
(o)(2)(E)(E) [inserted: Disclosure.—]
[inserted: The Secretary may not prescribe a new or amended energy conservation standard under this section for a type (or class) of covered product unless the Secretary, not later than the date on which the standard is prescribed, publicly discloses each meeting held by the Secretary, during the 5-year period preceding such date, with any entity that—]
(o)(2)(E)(i)(i) [inserted: ]
[inserted: has ties to the People’s Republic of China or the Chinese Communist Party;]
(o)(2)(E)(ii)(ii) [inserted: ]
[inserted: has produced studies regarding, or advocated for, regulations or policy to limit, restrict, or ban the use of any type of energy; and]
(o)(2)(E)(iii)(iii) [inserted: ]
[inserted: has applied for or received Federal funds.]
(o)(2)(B)(i)(i) [struck: ]
[struck: In determining whether a standard is economically justified, the Secretary shall, after receiving views and comments furnished with respect to the proposed standard, determine whether the benefits of the standard exceed its burdens by, to the greatest extent practicable, considering—]
(o)(2)(B)(i)(I)(I) [struck: ]
[struck: the economic impact of the standard on the manufacturers and on the consumers of the products subject to such standard;]
(o)(2)(B)(i)(II)(II) [struck: ]
[struck: the savings in operating costs throughout the estimated average life of the covered product in the type (or class) compared to any increase in the price of, or in the initial charges for, or maintenance expenses of, the covered products which are likely to result from the imposition of the standard;]
(o)(2)(B)(i)(III)(III) [struck: ]
[struck: the total projected amount of energy, or as applicable, water, savings likely to result directly from the imposition of the standard;]
(o)(2)(B)(i)(IV)(IV) [struck: ]
[struck: any lessening of the utility or the performance of the covered products likely to result from the imposition of the standard;]
(o)(2)(B)(i)(V)(V) [struck: ]
[struck: the impact of any lessening of competition, as determined in writing by the Attorney General, that is likely to result from the imposition of the standard;]
(o)(2)(B)(i)(VI)(VI) [struck: ]
[struck: the need for national energy and water conservation; and]
(o)(2)(B)(i)(VII)(VII) [struck: ]
[struck: other factors the Secretary considers relevant.]
(o)(2)(B)(ii)(ii) [struck: ]
[struck: For purposes of clause (i)(V), the Attorney General shall make a determination of the impact, if any, of any lessening of competition likely to result from such standard and shall transmit such determination, not later than 60 days after the publication of a proposed rule prescribing or amending an energy conservation standard, in writing to the Secretary, together with an analysis of the nature and extent of such impact. Any such determination and analysis shall be published by the Secretary in the Federal Register.]
(o)(2)(B)(iii)(iii) [struck: ]
[struck: If the Secretary finds that the additional cost to the consumer of purchasing a product complying with an energy conservation standard level will be less than three times the value of the energy, and as applicable, water, savings during the first year that the consumer will receive as a result of the standard, as calculated under the applicable test procedure, there shall be a rebuttable presumption that such standard level is economically justified. A determination by the Secretary that such criterion is not met shall not be taken into consideration in the Secretary’s determination of whether a standard is economically justified.]
(o)(3)(3) (3) [inserted: Factors for determination.—]
[struck: The Secretary may not prescribe an amended or new standard under this section for a type (or class) of covered product if—]
(o)(3)(A)(A) (A) [inserted: Economic analysis.—]
(o)(3)(A)(i)(i) [inserted: Determination.—]
[inserted: Prior to prescribing any new or amended energy conservation standard under this section for any type (or class) of covered product, the Secretary shall conduct a quantitative economic impact analysis of imposition of the energy conservation standard that determines the predicted—]
(o)(3)(A)(i)(I)(I) [inserted: ]
[inserted: effects of imposition of the energy conservation standard on costs and monetary benefits to consumers of the products subject to such energy conservation standard, including—]
(o)(3)(A)(i)(I)(aa)(aa) [inserted: ]
[inserted: costs to low-income households; and]
(o)(3)(A)(i)(I)(bb)(bb) [inserted: ]
[inserted: variations in costs to consumers based on differences in regions, including rural populations, cost of living comparisons, and climatic differences;]
(o)(3)(A)(i)(II)(II) [inserted: ]
[inserted: effects of imposition of the energy conservation standard on employment; and]
(o)(3)(A)(i)(III)(III) [inserted: ]
[inserted: lifecycle costs for the covered product, including costs associated with the purchase, installation, maintenance, disposal, and replacement of the covered product.]
(o)(3)(A)(ii)(ii) [inserted: Notice and comment.—]
[inserted: The Secretary shall provide public notice in the Federal Register and at least 60 days for public comment on the quantitative economic impact analysis conducted under clause (i).]
(o)(3)(A)[struck: for products other than dishwashers, clothes washers, clothes dryers, and kitchen ranges and ovens, a test procedure has not been prescribed pursuant to section 6293 of this title with respect to that type (or class) of product; or]
(o)(3)(B)(B) (B) [inserted: Prohibition on additional costs to the consumer.—]
[inserted: The Secretary may not determine that imposition of an energy conservation standard is economically justified unless the Secretary, based on an economic analysis under subparagraph (A), determines that—]
(o)(3)(B)(i)(i) [inserted: ]
[inserted: imposition of such energy conservation standard is not likely to result in additional net costs to the consumer, including any increase in net costs associated with the purchase, installation, maintenance, disposal, and replacement of the covered product; and]
(o)(3)(B)(ii)(ii) [inserted: ]
[inserted: the monetary value of the energy savings and, as applicable, water savings, that the consumer will receive as a result of such energy conservation standard during the first 3 years after purchasing and installing a covered product complying with such energy conservation standard, as calculated under the applicable test procedure, will be greater than any increased costs to the consumer of the covered product due to imposition of such energy conservation standard, including increased costs associated with the purchase, installation, maintenance, disposal, and replacement of the covered product.]
(o)(3)(C)(C) [inserted: Required energy or water savings.—]
[inserted: The Secretary may not determine that imposition of an energy conservation standard is economically justified unless the Secretary determines that compliance with such energy conservation standard will result in—]
(o)(3)(C)(i)(i) [inserted: ]
[inserted: a reduction of at least 0.3 quads of site energy over 30 years; or]
(o)(3)(C)(ii)(ii) [inserted: ]
[inserted: at least a 10 percent reduction in energy or water use of the covered product.]
(o)(3)(D)(D) [inserted: Criteria related to performance.—]
[inserted: The Secretary may not determine that imposition of an energy conservation standard is economically justified unless the Secretary determines that imposition of such energy conservation standard will not result in any lessening of the utility or the performance of the applicable covered product, taking into consideration the effects of such energy conservation standard on—]
(o)(3)(D)(i)(i) [inserted: ]
[inserted: the compatibility of the covered product with existing systems;]
(o)(3)(D)(ii)(ii) [inserted: ]
[inserted: the life span of the covered product;]
(o)(3)(D)(iii)(iii) [inserted: ]
[inserted: the operating conditions of the covered product;]
(o)(3)(D)(iv)(iv) [inserted: ]
[inserted: the duty cycle, charging time, and run time of the covered product, as applicable;]
(o)(3)(D)(v)(v) [inserted: ]
[inserted: the maintenance requirements of the covered product; and]
(o)(3)(D)(vi)(vi) [inserted: ]
[inserted: the replacement and disposal requirements for the covered product.]
(o)(3)(E)(E) [inserted: Technological innovation.—]
[inserted: The Secretary may not determine that imposition of an energy conservation standard is economically justified unless the Secretary determines that imposition of such energy conservation standard is not likely to result in the unavailability in the United States of a type (or class) of products based on what type of fuel the product consumes.]
(o)(3)(F)(F) [inserted: Other considerations.—]
(o)(3)(F)(i)(i) [inserted: In general.—]
[inserted: In determining whether imposition of an energy conservation standard is economically justified, the Secretary—]
(o)(3)(F)(i)(I)(I) [inserted: ]
[inserted: shall prioritize the interests of consumers;]
(o)(3)(F)(i)(II)(II) [inserted: ]
[inserted: may not consider estimates of the social costs or social benefits associated with incremental greenhouse gas emissions; and]
(o)(3)(F)(i)(III)(III) [inserted: ]
[inserted: shall consider—]
(o)(3)(F)(i)(III)(aa)(aa) [inserted: ]
[inserted: the economic impact, including any regulatory burden, of the standard on the manufacturers and on the consumers of the products subject to such standard;]
(o)(3)(F)(i)(III)(bb)(bb) [inserted: ]
[inserted: the savings in operating costs, including consumer fuel costs, throughout the estimated average life of the covered product in the type (or class) compared to any increase in the price of, or in the initial charges for, or maintenance expenses of, the covered products which are likely to result from the imposition of the standard;]
(o)(3)(F)(i)(III)(cc)(cc) [inserted: ]
[inserted: the total projected amount of energy, or, as applicable, water, savings likely to result directly from the imposition of the standard;]
(o)(3)(F)(i)(III)(dd)(dd) [inserted: ]
[inserted: the need for national energy and water conservation;]
(o)(3)(F)(i)(III)(ee)(ee) [inserted: ]
[inserted: the impact of any lessening of market competition, as determined in writing by the Attorney General under clause (ii), that is likely to result from the imposition of the standard;]
(o)(3)(F)(i)(III)(ff)(ff) [inserted: ]
[inserted: whether the imposition of the energy conservation standard is likely to result price discrimination; and]
(o)(3)(F)(i)(III)(gg)(gg) [inserted: ]
[inserted: other factors the Secretary considers relevant.]
(o)(3)(F)(ii)(ii) [inserted: Attorney general determination.—]
[inserted: For purposes of clause (i)(III)(ee), the Attorney General shall make a determination of the impact, if any, of any lessening of market competition likely to result from such standard and shall transmit such determination, not later than 60 days after the publication of a proposed rule prescribing or amending an energy conservation standard, in writing to the Secretary, together with an analysis of the nature and extent of such impact. Any such determination and analysis shall be published by the Secretary in the Federal Register.]
(o)(3)(G)(G) [inserted: Regulatory review.—]
(o)(3)(G)(i)(i) [inserted: Evaluation.—]
[inserted: Not later than 2 years after the issuance of any final rule prescribing a new or amended energy conservation standard under this section for any type (or class) of covered product, the Secretary shall evaluate the rule to determine whether such energy conservation standard is technologically feasible and economically justified and whether the regulatory impact analysis for such rule remains accurate.]
(o)(3)(G)(ii)(ii) [inserted: Effect.—]
[inserted: Notwithstanding any other provision of this part, if the Secretary determines, based on an evaluation under clause (i), that an energy conservation standard is not technologically feasible or economically justified—]
(o)(3)(G)(ii)(I)(I) [inserted: ]
[inserted: the Secretary shall publish such determination and such energy conservation standard shall have no force or effect (except that such energy conservation standard shall be considered to be in effect for purposes of section 327); and]
(o)(3)(G)(ii)(II)(II) [inserted: ]
[inserted: the Secretary may publish a final rule amending the energy conservation standard for the type (or class) of covered product to be technologically feasible and economically justified in accordance with this subsection, which amendment shall apply to such a product that is manufactured after the date that is 3 years after publication of such final rule.]
(o)(3)(B)[struck: the Secretary determines, by rule, that the establishment of such standard will not result in significant conservation of energy or, in the case of showerheads, faucets, water closets, or urinals, water, or that the establishment of such standard is not technologically feasible or economically justified.]
(o)(3)[struck: For purposes of section 6297 of this title, a determination under subparagraph (B) with respect to any type (or class) of covered products shall have the same effect as would a standard prescribed for such type (or class).]
(o)(4)(4) (4)
The Secretary may not prescribe an amended or new standard under this section if the Secretary finds (and publishes such finding) that interested persons have established by a preponderance of the evidence that the standard is likely to result in the unavailability in the United States in any covered product type (or class) of performance characteristics (including reliability), features, sizes, capacities, and volumes that are substantially the same as those generally available in the United States at the time of the Secretary’s finding. The failure of some types (or classes) to meet this criterion shall not affect the Secretary’s determination of whether to prescribe a standard for other types (or classes).The Secretary may not prescribe an amended or new standard under this section if the Secretary finds (and publishes such finding) that interested persons have established by a preponderance of the evidence that the standard is likely to result in the unavailability in the United States in any covered product type (or class) of performance characteristics (including reliability), features, sizes, capacities, and volumes that are substantially the same as those generally available in the United States at the time of the Secretary’s finding. The failure of some types (or classes) to meet this criterion shall not affect the Secretary’s determination of whether to prescribe a standard for other types (or classes).
(o)(5)(5) (5)
The Secretary may set more than 1 energy conservation standard for products that serve more than 1 major function by setting 1 energy conservation standard for each major function.The Secretary may set more than 1 energy conservation standard for products that serve more than 1 major function by setting 1 energy conservation standard for each major function.

§ 6295(o)(6)Regional standards for furnaces, central air conditioners, and heat pumps.—(D)–(E)

(o)(6) unchanged

WhereMarkThe Code nowMarkAs the bill would leave it
(D)(i)(I)(I) (I)
the establishment of additional regional standards will produce significant energy savings in comparison to establishing only a single national standard; andthe establishment of additional regional standards will produce significant energy savings in comparison to establishing only a single national standard; and
(D)(i)(II)(II) (II)
the additional regional standards are economically justified under this [struck: paragraph]; andthe additional regional standards are economically justified under this [inserted: subsection]; and
(D)(ii)(ii) (ii)
consider the impact of the additional regional standards on consumers, manufacturers, and other market participants, including product distributors, dealers, contractors, and installers.consider the impact of the additional regional standards on consumers, manufacturers, and other market participants, including product distributors, dealers, contractors, and installers.
(E)(E) Application; effective date.—(E) Application; effective date.—

§ 6295(o)(6)Regional standards for furnaces, central air conditioners, and heat pumps.—(E)–(F)

(o)(6)(E)(i) unchanged

WhereMarkThe Code nowMarkAs the bill would leave it
(E)(i)(II)(II) (II)
apply to all products manufactured or imported into the United States on and after the effective date for the standard.apply to all products manufactured or imported into the United States on and after the effective date for the standard.
(E)(ii)(ii) Regional standards.—(ii) Regional standards.—
Any additional and more restrictive regional standard established for a product under this paragraph shall apply to any such product [struck: installed] [struck: on] or [struck: after] [struck: the] [struck: effective date of ]the [struck: standard] [struck: in ]States [struck: in] [struck: which] the [struck: Secretary] [struck: has] [struck: designated] the standard[struck: to apply].Any additional and more restrictive regional standard established for a product under this paragraph shall apply[inserted: ,] [inserted: in States in which the Secretary has designated the standard ]to [inserted: apply, to ]any such product [inserted: that] [inserted: is] [inserted: manufactured ]or [inserted: imported] [inserted: into] the [inserted: United] States [inserted: on] [inserted: or] [inserted: after ]the [inserted: effective] [inserted: date] [inserted: of] the standard.
(F)(F) Continuation of regional standards.—(F) Continuation of regional standards.—
(F)(i)(i) In general.—(i) In general.—
In any subsequent rulemaking for any product for which a regional standard has been previously established, the Secretary shall determine whether to continue the establishment of separate regional standards for the product.In any subsequent rulemaking for any product for which a regional standard has been previously established, the Secretary shall determine whether to continue the establishment of separate regional standards for the product.

§ 6295(p)(2)After the publication of such proposed rulemaking, the Secretary shall, in accordance…(A)–(C)

(o)(6)(F)(ii)–(p)(1) unchanged

WhereMarkThe Code nowMarkAs the bill would leave it
(2)(2) (2)
After the publication of such proposed rulemaking, the Secretary shall, in accordance with section 6306 of this title, afford interested persons an opportunity, during a period of not less than 60 days, to present oral and written comments (including an opportunity to question those who make such presentations, as provided in such section) on matters relating to such proposed rule, including—After the publication of such proposed rulemaking, the Secretary shall, in accordance with section 6306 of this title, afford interested persons an opportunity, during a period of not less than 60 days, to present oral and written comments (including an opportunity to question those who make such presentations, as provided in such section) on matters relating to such proposed rule, including—
(A)(A) (A)
whether the standard to be prescribed is economically justified ([struck: taking] [struck: into] [struck: account] [struck: those] [struck: factors] [struck: which the Secretary must consider under ]subsection (o)[struck: (2])[struck: )] or will result in the effects described in subsection (o)(4);whether the standard to be prescribed is economically justified ([inserted: as] [inserted: determined] [inserted: in] [inserted: accordance] [inserted: with] subsection (o)) or will result in the effects described in subsection (o)(4);
(B)(B) (B)
whether the standard will achieve the maximum improvement in energy efficiency which is technologically feasible;whether the standard will achieve the maximum improvement in energy efficiency which is technologically feasible;
(C)(C) (C)
if the standard will not achieve such improvement, whether the reasons for not achieving such improvement are adequate; andif the standard will not achieve such improvement, whether the reasons for not achieving such improvement are adequate; and

Rest of § 6295 unchanged

42 U.S.C. § 6296 Requirements of manufacturers

+1 −1Shown
More for 42 U.S.C. § 6296
Read § 6296Only this section
1 change the bill asks for here, 1 carried out
  1. Carried out:

    Section 326(d)(1) of the Energy Policy and Conservation Act is amended by striking or, in the case of showerheads, faucets, water closets, and urinals, and inserting or, as applicable,.

§ 6296(c)–(d)

Start of § 6296 to (b)(5) unchanged

WhereMarkThe Code nowMarkAs the bill would leave it
(c)(c) Deadline(c) Deadline
Each manufacturer shall use labels reflecting the range data required to be disclosed under section 6294(c)(1)(B) of this title after the expiration of 60 days following the date of publication of any revised table of ranges unless the rule under section 6294 of this title provides for a later date. The Commission may not require labels be changed to reflect revised tables of ranges more often than annually.Each manufacturer shall use labels reflecting the range data required to be disclosed under section 6294(c)(1)(B) of this title after the expiration of 60 days following the date of publication of any revised table of ranges unless the rule under section 6294 of this title provides for a later date. The Commission may not require labels be changed to reflect revised tables of ranges more often than annually.
(d)(d) Information requirements(d) Information requirements
(d)(1)(1) (1)
For purposes of carrying out this part, the Secretary may require, under this part or other provision of law administered by the Secretary, each manufacturer of a covered product to submit information or reports to the Secretary with respect to energy efficiency, energy use, or, [struck: in] [struck: the case of showerheads],[struck: faucets, ]water [struck: closets, and urinals, water ]use of such covered product and the economic impact of any proposed energy conservation standard, as the Secretary determines may be necessary to establish and revise test procedures, labeling rules, and energy conservation standards for such product and to insure compliance with the requirements of this part. In making any determination under this paragraph, the Secretary shall consider existing public sources of information, including nationally recognized certification programs of trade associations.For purposes of carrying out this part, the Secretary may require, under this part or other provision of law administered by the Secretary, each manufacturer of a covered product to submit information or reports to the Secretary with respect to energy efficiency, energy use, or, [inserted: as] [inserted: applicable],water use of such covered product and the economic impact of any proposed energy conservation standard, as the Secretary determines may be necessary to establish and revise test procedures, labeling rules, and energy conservation standards for such product and to insure compliance with the requirements of this part. In making any determination under this paragraph, the Secretary shall consider existing public sources of information, including nationally recognized certification programs of trade associations.
(d)(2)(2) (2)
The Secretary shall exercise authority under this section in a manner designed to minimize unnecessary burdens on manufacturers of covered products.The Secretary shall exercise authority under this section in a manner designed to minimize unnecessary burdens on manufacturers of covered products.
(d)(3)(3) (3)
The provisions of section 796(d) of title 15 shall apply with respect to information obtained under this subsection to the same extent and in the same manner as they apply with respect to energy information obtained under section 796 of title 15.The provisions of section 796(d) of title 15 shall apply with respect to information obtained under this subsection to the same extent and in the same manner as they apply with respect to energy information obtained under section 796 of title 15.

42 U.S.C. § 6317 Energy conservation standards for high-intensity discharge lamps, distribution transformers, and small electric motors

+5 −2Shown
More for 42 U.S.C. § 6317
Read § 6317Only this section
2 changes the bill asks for here, 2 carried out
  1. Carried out:

    Section 346 of the Energy Policy and Conservation Act (42 U.S.C. 6317) is amended by striking subsection (c).

  2. Carried out:

    Section 346 of the Energy Policy and Conservation Act (42 U.S.C. 6317) is amended by adding at the end the following:(g) No new or revised standards for distribution transformers.— (1) In general.— Beginning on the date of enactment of this subsection, the Secretary may not prescribe any new or amended energy conservation standard under part B or this part for distribution transformers, …

§ 6317(b)–(e)

Start of § 6317 to (b)(1) unchanged

WhereMarkThe Code nowMarkAs the bill would leave it
(b)(2)(2) (2)
The Secretary shall, within 18 months after the date on which testing requirements are prescribed by the Secretary pursuant to paragraph (1), prescribe, by rule, energy conservation standards for those small electric motors for which the Secretary prescribed testing requirements under paragraph (1).The Secretary shall, within 18 months after the date on which testing requirements are prescribed by the Secretary pursuant to paragraph (1), prescribe, by rule, energy conservation standards for those small electric motors for which the Secretary prescribed testing requirements under paragraph (1).
(b)(3)(3) (3)
Any standard prescribed under paragraph (2) shall apply to small electric motors manufactured 60 months after the date such rule is published or, in the case of small electric motors which require listing or certification by a nationally recognized testing laboratory, 84 months after such date. Such standards shall not apply to any small electric motor which is a component of a covered product under section 6292(a) of this title or a covered equipment under section 6311 of this title.Any standard prescribed under paragraph (2) shall apply to small electric motors manufactured 60 months after the date such rule is published or, in the case of small electric motors which require listing or certification by a nationally recognized testing laboratory, 84 months after such date. Such standards shall not apply to any small electric motor which is a component of a covered product under section 6292(a) of this title or a covered equipment under section 6311 of this title.
(c)(c) [struck: Consideration of criteria under other law]
[struck: In establishing any standard under this section, the Secretary shall take into consideration the criteria contained in section 6295(n) of this title.]
(d)(d) Prescription of labeling requirements by Secretary(d) Prescription of labeling requirements by Secretary
The Secretary shall, within six months after the date on which energy conservation standards are prescribed by the Secretary for high-intensity discharge lamps and distribution transformers pursuant to subsection (a)(2) and small electric motors pursuant to subsection (b)(2), prescribe labeling requirements for such lamps, transformers, and small electric motors.The Secretary shall, within six months after the date on which energy conservation standards are prescribed by the Secretary for high-intensity discharge lamps and distribution transformers pursuant to subsection (a)(2) and small electric motors pursuant to subsection (b)(2), prescribe labeling requirements for such lamps, transformers, and small electric motors.
(e)(e) Compliance by manufacturers with labeling requirements(e) Compliance by manufacturers with labeling requirements
Beginning on the date which occurs six months after the date on which a labeling rule is prescribed for a product under subsection (d), each manufacturer of a product to which such a rule applies shall provide a label which meets, and is displayed in accordance with, the requirements of such rule.Beginning on the date which occurs six months after the date on which a labeling rule is prescribed for a product under subsection (d), each manufacturer of a product to which such a rule applies shall provide a label which meets, and is displayed in accordance with, the requirements of such rule.

§ 6317(f)–(g)

(f) unchanged

WhereMarkThe Code nowMarkAs the bill would leave it
(f)(1)(B)(B) (B)
it shall be unlawful for any manufacturer or private labeler to distribute in commerce any new product for which an energy conservation standard is prescribed under subsection (a)(2) or (b)(2) which is not in conformity with the applicable energy conservation standard.it shall be unlawful for any manufacturer or private labeler to distribute in commerce any new product for which an energy conservation standard is prescribed under subsection (a)(2) or (b)(2) which is not in conformity with the applicable energy conservation standard.
(f)(2)(2) (2)
For purposes of section 6303(a) of this title, paragraph (1) of this subsection shall be considered to be a part of section 6302 of this title.For purposes of section 6303(a) of this title, paragraph (1) of this subsection shall be considered to be a part of section 6302 of this title.
(g)(g) [inserted: No new or revised standards for distribution transformers.—]
(g)(1)(1) [inserted: In general.—]
[inserted: Beginning on the date of enactment of this subsection, the Secretary may not prescribe any new or amended energy conservation standard under part B or this part for distribution transformers, including those distribution transformers for which the Secretary prescribed testing requirements under subsection (a)(1) and low-voltage dry-type distribution transformers.]
(g)(2)(2) [inserted: Effect on existing standards.—]
[inserted: Paragraph (1) does not affect any energy conservation standards prescribed under part B or this part before the date of enactment of this subsection.]

Step through the changes