Changes to the Code
H.R. 5441 · Fusion Advanced Manufacturing Parity Act · Introduced The text as a member of Congress first filed it. Most bills never get further than this.
In committee · step 2 of 5
26 U.S.C. § 30D Clean vehicle credit
1 change the bill asks for here, 1 carried out
- Carried out:
Section 30D(e)(1)(A) of the Internal Revenue Code of 1986 is amended by striking
section 45X(c)(6)
and insertingsection 45X(c)(7)
.
§ 30D(e)Critical mineral and battery component requirements(1)
Start of § 30D to (d)(7)(B) unchanged ·
(e) Critical mineral and battery component requirements
(1) Critical minerals requirement
(A) In general The requirement described in this subparagraph with respect to a vehicle is that, with respect to the battery from which the electric motor of such vehicle draws electricity, the percentage of the value of the applicable critical minerals (as defined in section 45X(c)([struck: 6][inserted: 7])) contained in such battery that were—
(i) extracted or processed—
(I) in the United States, or
Rest of § 30D unchanged ·
26 U.S.C. § 45X Advanced manufacturing production credit
23 changes the bill asks for here, 22 carried out
- Carried out:
in subparagraph (L)(ii), by striking
and
at the end, - Carried out:
by redesignating subparagraph (M) as subparagraph (N), and
- Carried out:
by inserting after subparagraph (L) the following new subparagraph:
(M) in the case of a fusion energy component, an amount equal to 25 percent of the sales price of such component, and,
- Carried out:
in subparagraph (A), by striking
and (D)
and inserting, (D), and (E)
, - Carried out:
by redesignating subparagraphs (D) and (E) as subparagraphs (E) and (F), respectively, and
- Carried out:
by inserting after subparagraph (C) the following new subparagraph:
(D) Phase out for fusion energy components.— (i) In general.— In the case of any fusion energy component sold after December 31, 2031, the amount determined under this subsection with respect to such component shall be equal to the product of— (I) the amount determined under …
- Carried out:
by redesignating clauses (iv) and (v) as clauses (v) and (vi), respectively, and
- Carried out:
by inserting after clause (iii) the following new clause:
(iv) any fusion energy component,,
- Carried out:
by redesignating paragraph (6) as paragraph (7),
- Carried out:
by inserting after paragraph (5) the following new paragraph:
(6) Fusion energy component.— (A) In general.— The term “fusion energy component” means any of the following components which are intended for the operation or use of a fusion energy machine: (i) A high-temperature superconducting magnet. (ii) A fusion chamber or plasma vacuum …
- Carried out:
in subparagraph (D)(i), by inserting
beryllium hydroxide, or beryllium fluoride,
aftercopper-beryllium master alloy,
, - Carried out:
in subparagraph (P)(i), by striking
or lithium hydroxide
and inserting, lithium hydroxide, lithium chloride, lithium fluoride, lithium-6, lithium-7, or lithium tetrafluoroberyllate
, - Carried out:
by striking subparagraphs (X) and (Y) and inserting the following:
(X) Tungsten.— Tungsten which is— (i) converted to tungsten master alloy, (ii) converted to ammonium paratungstate, ferrotungsten, tungsten trioxide, or tungsten carbide, or (iii) purified to a minimum purity of 85 percent tungsten by mass. (Y) Vanadium.— Vanadium which is— (i) …
- Not carried out:
by redesignating clauses (xxiii) through (xxv) as clauses (xxvi) through (xxviii), respectively,
We couldn't work out the numbering that follows (xxvi).
Technical detail
can't count on from (xxvi) - Carried out:
by redesignating clauses (vii) through (xxii) as clauses (ix) through (xxiv), respectively,
The section already has a provision under this letter or number, so it would have two.
- Carried out:
by redesignating clauses (iii) through (vi) as clauses (iv) through (vii), respectively,
- Carried out:
by inserting after clause (ii) the following new clause:
(iii) Deuterium.,
- Carried out:
by inserting after clause (vii) (as redesignated by subclause (III) of this clause) the following new clause:
(viii) Helium–3., and
- Carried out:
by inserting after clause (xxiv) (as redesignated by subclause (II) of this clause) the following new clause:
(xxv) Tritium.,
The section already has a provision under this letter or number, so it would have two.
- Carried out:
by redesignating subparagraphs (I) through (AA) as subparagraphs (K) through (CC), respectively,
- Carried out:
by redesignating subparagraphs (E) through (H) as subparagraphs (F) through (I), respectively,
- Carried out:
by inserting after subparagraph (D) the following new subparagraph:
(E) Boron.— Boron which is converted to boron carbide or ferroboron., and
- Carried out:
by inserting after subparagraph (I) (as redesignated by clause (vi) of this paragraph) the following new subparagraph:
(J) Copper chromium zirconium.— Alloys or assemblies comprised of not less than 80 percent copper..
This bill puts a provision under a letter or number this section already uses, so the section would have two. The law has probably changed since the bill was written.
§ 45X(b)Credit amount(1)–(2)
Start of § 45X to (b)(1)(L) unchanged ·
(i) $10 (or, in the case of a battery module which does not use battery cells, $45), multiplied by
(ii) subject to paragraph (4), the capacity of such battery module (expressed on a kilowatt-hour basis),[struck: and]
(M) [inserted: in the case of a fusion energy component, an amount equal to 25 percent of the sales price of such component, and]
[struck: (M)] [inserted: (N)] in the case of any applicable critical mineral, an amount equal to 10 percent (2.5 percent in the case of metallurgical coal) of the costs incurred by the taxpayer with respect to production of such mineral.
(2) Applicable amounts
(A) Wind energy components For purposes of paragraph (1)(F)(ii), the applicable amount with respect to any wind energy component shall be—
§ 45X(b)Credit amount(2)–(3)
(b)(2)(A)(i)–(B)(iv) unchanged ·
(v) in the case of a microinverter or a distributed wind inverter, 11 cents.
(3) Phase out and termination
(A) In general Subject to subparagraphs (C) [struck: and][inserted: ,] (D), [inserted: and (E), ]in the case of any eligible component sold after December 31, 2029, the amount determined under this subsection with respect to such component shall be equal to the product of—
(i) the amount determined under paragraph (1) with respect to such component, as determined without regard to this paragraph, multiplied by
(ii) the phase out percentage under subparagraph (B).
§ 45X(b)Credit amount(3)–(4)
(b)(3)(B)–(C) unchanged ·
(III) in the case of any applicable critical mineral produced during calendar year 2033, 25 percent, and
(IV) in the case of any applicable critical mineral produced after December 31, 2033, 0 percent.
(D) [inserted: Phase out for fusion energy components.—]
(i) [inserted: In general.—] [inserted: In the case of any fusion energy component sold after December 31, 2031, the amount determined under this subsection with respect to such component shall be equal to the product of—]
(I) [inserted: the amount determined under paragraph (1) with respect to such component, as determined without regard to this paragraph, multiplied by]
(II) [inserted: the phase out percentage under clause (ii).]
(ii) [inserted: Phase out percentage.—] [inserted: The phase out percentage under this clause is equal to—]
(I) [inserted: in the case of a fusion energy component sold during calendar year 2032, 75 percent,]
(II) [inserted: in the case of a fusion energy component sold during calendar year 2033, 50 percent,]
(III) [inserted: in the case of a fusion energy component sold during calendar year 2034, 25 percent, and]
(IV) [inserted: in the case of a fusion energy component sold after December 31, 2034, 0 percent.]
[struck: (D)] [inserted: (E)] Termination for wind energy components This section shall not apply to any wind energy component produced and sold after December 31, 2027.
[struck: (E)] [inserted: (F)] Termination for metallurgical coal This section shall not apply to any metallurgical coal produced after December 31, 2029.
(4) Limitation on capacity of battery cells and battery modules
(A) In general For purposes of subparagraph (K)(ii) or (L)(ii) of paragraph (1), the capacity determined under either subparagraph with respect to a battery cell or battery module shall not exceed a capacity-to-power ratio of 100:1.
§ 45X(c)(1)Eligible component(A)–(C)
(b)(4)(B)–(c)(1)(A) unchanged ·
(ii) any wind energy component,
(iii) any inverter described in subparagraphs (B) through (G) of paragraph (2),
(iv) [inserted: any fusion energy component,]
[struck: (iv)] [inserted: (v)] any qualifying battery component, and
[struck: (v)] [inserted: (vi)] any applicable critical mineral.
(B) Application with other credits The term “eligible component” shall not include any property which is produced at a facility if the basis of any property which is part of such facility is taken into account for purposes of the credit allowed under section 48C after the date of the enactment of this section.
(C) Material assistance from prohibited foreign entities In the case of taxable years beginning after the date of enactment of this subparagraph, the term “eligible component” shall not include any property which includes any material assistance from a prohibited foreign entity (as defined in section 7701(a)(52), as applied by substituting “used in a product sold before January 1, 2027” for “used in a product sold before January 1, 2030” in subparagraph (D)(iv)(II)(bb) thereof).
§ 45X(c)–(d)
(c)(2)–(5) unchanged ·
(II) with an aggregate capacity of not less than 7 kilowatt-hours (or, in the case of a module for a hydrogen fuel cell vehicle, not less than 1 kilowatt-hour), and
(III) which is comprised of all other essential equipment needed for battery functionality, such as current collector assemblies and voltage sense harnesses, or any other essential energy collection equipment.
(6) [inserted: Fusion energy component.—]
(A) [inserted: In general.—] [inserted: The term “fusion energy component” means any of the following components which are intended for the operation or use of a fusion energy machine:]
(i) [inserted: A high-temperature superconducting magnet.]
(ii) [inserted: A fusion chamber or plasma vacuum vessel.]
(iii) [inserted: A blanket system.]
(iv) [inserted: High-temperature superconductor tape or wire.]
(v) [inserted: A high-energy laser.]
(vi) [inserted: A fusion heating system.]
(vii) [inserted: A high-voltage capacitor.]
(viii) [inserted: Films used in high-voltage capacitors.]
(ix) [inserted: Plasma compression systems.]
(x) [inserted: High-power switches.]
(xi) [inserted: Packaging used in high-power switches.]
(xii) [inserted: High-voltage conductors and insulators.]
(xiii) [inserted: Composite materials used in fusion chambers or vacuum vessels.]
(xiv) [inserted: Fused quartz parts and ceramics used in fusion chambers or vacuum vessels.]
(xv) [inserted: Plasma formation devices.]
(xvi) [inserted: Fuel processing and storage components.]
(xvii) [inserted: Cooling system components.]
(xviii) [inserted: Fusion targets.]
(xix) [inserted: Dielectric fluids and systems.]
(xx) [inserted: Controls equipment.]
(B) [inserted: Fusion energy machine.—] [inserted: The term “fusion energy machine” means a fusion machine (as defined in section 11 of the Atomic Energy Act of 1954 (42 U.S.C. 2014)) which is used for the production of electricity or process heat, as well as any associated system (such as for fuel and exhaust processing).]
(C) [inserted: High-temperature superconducting magnet.—] [inserted: The term “high-temperature superconducting magnet” means the entire system of electromagnetic coils consisting of high-temperature superconducting tape and structural metals that produce the magnetic fields, which confine, shape, and stabilize the plasma in a fusion energy machine, including toroidal field magnets, poloidal field magnets, and central solenoid magnets.]
(D) [inserted: Fusion chamber or plasma vacuum vessel.—] [inserted: The term “fusion chamber or plasma vacuum vessel” means the enclosing structure that—]
(i) [inserted: holds fusion targets or creates and maintains a vacuum in the area which contains the fusion plasma, and]
(ii) [inserted: absorbs the plasma heat exhaust and structurally supports other integrated components, such as the plasma facing material, in-vessel diagnostics, and plasma heating systems in the fusion energy machine.]
(E) [inserted: Blanket system.—] [inserted: The term “blanket system” means the containers, pipes, pumps, chemistry control, tritium and fuel extractors, heat exchangers, and liquid metal, salt bath, or other components that are designed to remove the fusion heat, shield components from neutrons, generate tritium, and transfer heat to a power generation system.]
(F) [inserted: High-temperature superconductor tape or wire.—] [inserted: The term “high-temperature superconductor tape or wire” means the multi-layered tape or foil that carries electrical current with no resistance at high temperatures and magnetic fields.]
(G) [inserted: High-energy laser.—] [inserted: The term “high-energy laser” means the sources of light and associated optic systems that transfer beams of light to either directly or indirectly implode a fusion fuel capsule to create a fusion reaction.]
(H) [inserted: Fusion heating system.—] [inserted: The term “fusion heating system” means an auxiliary system used to increase the temperature of fusion fuel to create fusion reactions.]
(I) [inserted: High-voltage capacitor.—] [inserted: The term “high-voltage capacitor” means an electrical component designed to store and release electrical energy in circuits operating at high voltage levels above 1,000 volts, as well as circuit components (such as printed circuit boards) used to enable the capacitor system or related power system to function.]
(J) [inserted: Films used in high-voltage capacitors.—] [inserted: The term “films used in high-voltage capacitors” means metalized and non-metalized films used due to their dielectric properties, high breakdown voltage, and thermal stability in windings for high-voltage capacitors.]
(K) [inserted: Plasma compression system.—] [inserted: The term “plasma compression system” means mechanical or electrical components, such as electromagnetic coils or gas-driven pistons, used to compress plasma targets.]
(L) [inserted: High-power switches.—] [inserted: The term “high-power switches” means switching devices which—]
(i) [inserted: use semiconductors, electrodes and a gas chamber, or other approaches, and]
(ii) [inserted: are used to control and manage the flow of power in circuits by enabling or interrupting the flow of high voltage or high current greater than 1 kilovolt.]
(M) [inserted: Packaging used in high-power switches.—] [inserted: The term “packaging used in high-power switches” means covers, terminals, or connections, heat transfer components, or packaging surrounding a semiconductor die.]
(N) [inserted: High-voltage conductors and insulators.—] [inserted: The term “high-voltage conductors and insulators” means power transmission components used to connect high-voltage capacitors to fusion energy machines, including cables and busbars capable of operating greater than 1 kilovolt or 1 kiloampere.]
(O) [inserted: Composite materials used in vacuum vessels.—] [inserted: The term “composite materials used in vacuum vessels” means fiber reinforced materials, such as glass-epoxy systems, used to create vacuum chambers for fusion energy machines.]
(P) [inserted: Fused quartz and ceramic parts used in vacuum vessels.—] [inserted: The term “fused quartz parts and ceramics used in vacuum vessels” means components made of high-purity quartz material or other dielectric ceramics and machined into components used as plasma-facing components on fusion energy machine vacuum vessels.]
(Q) [inserted: Plasma formation device.—] [inserted: The term “plasma formation device” means components used to form fusion plasmas through methods such as coaxial helicity injection or local helicity injection.]
(R) [inserted: Fuel processing and storage components.—] [inserted: The term “fuel processing and storage components” means components used for the manufacture, purification, processing, transport, or storage of fusion fuels, including deuterium, tritium, and helium-3.]
(S) [inserted: Cooling system components.—] [inserted: The term “cooling system components” includes chillers, fluid coolers, distribution systems, and similar components that cool mechanical or electrical components (such as high-temperature superconducting magnets) during normal operations.]
(T) [inserted: Fusion targets.—] [inserted: The term “fusion targets” means components that—]
(i) [inserted: contain the fusion fuel in the fusion chamber, and]
(ii) [inserted: receive energy from lasers or electrical circuits to cause such fusion fuel to undergo a fusion reaction.]
(U) [inserted: Dielectric fluids and systems.—] [inserted: The term “dielectric fluids and systems” means—]
(i) [inserted: electrically insulated fluids, such as transformer oil or deionized water used for electrical insulation, and]
(ii) [inserted: any associated equipment needed to move and maintain the physical properties of such fluids, such as pumps, filtration systems, and cooling systems.]
(V) [inserted: Controls equipment.—] [inserted: The term “controls equipment” means any hardware or software used to electronically control any subsystem of a fusion energy machine.]
[struck: (6)] [inserted: (7)] Applicable critical minerals The term “applicable critical mineral” means any of the following:
(A) Aluminum Aluminum which is—
(i) converted from bauxite to a minimum purity of 99 percent alumina by mass, or
(ii) purified to a minimum purity of 99.9 percent aluminum by mass.
(B) Antimony Antimony which is—
(i) converted to antimony trisulfide concentrate with a minimum purity of 90 percent antimony trisulfide by mass, or
(ii) purified to a minimum purity of 99.65 percent antimony by mass.
(C) Barite Barite which is barium sulfate purified to a minimum purity of 80 percent barite by mass.
(D) Beryllium Beryllium which is—
(i) converted to copper-beryllium master alloy, [inserted: beryllium hydroxide, ]or[inserted: beryllium fluoride, or]
(ii) purified to a minimum purity of 99 percent beryllium by mass.
(E) [inserted: Boron.—] [inserted: Boron which is converted to boron carbide or ferroboron.]
[struck: (E)] [inserted: (F)] Cerium Cerium which is—
(i) converted to cerium oxide which is purified to a minimum purity of 99.9 percent cerium oxide by mass, or
(ii) purified to a minimum purity of 99 percent cerium by mass.
[struck: (F)] [inserted: (G)] Cesium Cesium which is—
(i) converted to cesium formate or cesium carbonate, or
(ii) purified to a minimum purity of 99 percent cesium by mass.
[struck: (G)] [inserted: (H)] Chromium Chromium which is—
(i) converted to ferrochromium consisting of not less than 60 percent chromium by mass, or
(ii) purified to a minimum purity of 99 percent chromium by mass.
[struck: (H)] [inserted: (I)] Cobalt Cobalt which is—
(i) converted to cobalt sulfate, or
(ii) purified to a minimum purity of 99.6 percent cobalt by mass.
(J) [inserted: Copper chromium zirconium.—] [inserted: Alloys or assemblies comprised of not less than 80 percent copper.]
[struck: (I)] [inserted: (K)] Dysprosium Dysprosium which is—
(i) converted to not less than 99 percent pure dysprosium iron alloy by mass, or
(ii) purified to a minimum purity of 99 percent dysprosium by mass.
[struck: (J)] [inserted: (L)] Europium Europium which is—
(i) converted to europium oxide which is purified to a minimum purity of 99.9 percent europium oxide by mass, or
(ii) purified to a minimum purity of 99 percent by mass.
[struck: (K)] [inserted: (M)] Fluorspar Fluorspar which is—
(i) converted to fluorspar which is purified to a minimum purity of 97 percent calcium fluoride by mass, or
(ii) purified to a minimum purity of 99 percent fluorspar by mass.
[struck: (L)] [inserted: (N)] Gadolinium Gadolinium which is—
(i) converted to gadolinium oxide which is purified to a minimum purity of 99.9 percent gadolinium oxide by mass, or
(ii) purified to a minimum purity of 99 percent gadolinium by mass.
[struck: (M)] [inserted: (O)] Germanium Germanium which is—
(i) converted to germanium tetrachloride, or
(ii) purified to a minimum purity of 99.99 percent germanium by mass.
[struck: (N)] [inserted: (P)] Graphite Graphite which is purified to a minimum purity of 99.9 percent graphitic carbon by mass.
[struck: (O)] [inserted: (Q)] Indium Indium which is—
(i) converted to—
(I) indium tin oxide, or
(II) indium oxide which is purified to a minimum purity of 99.9 percent indium oxide by mass, or
(ii) purified to a minimum purity of 99 percent indium by mass.
[struck: (P)] [inserted: (R)] Lithium Lithium which is—
(i) converted to lithium carbonate [struck: or][inserted: ,] lithium hydroxide, [inserted: lithium chloride, lithium fluoride, lithium-6, lithium-7, ]or[inserted: lithium tetrafluoroberyllate, or]
(ii) purified to a minimum purity of 99.9 percent lithium by mass.
[struck: (Q)] [inserted: (S)] Manganese Manganese which is—
(i) converted to manganese sulphate, or
(ii) purified to a minimum purity of 99.7 percent manganese by mass.
[struck: (R)] [inserted: (T)] Metallurgical coal Metallurgical coal which is suitable for use in the production of steel (within the meaning of the notice published by the Department of Energy entitled “Critical Material List; Addition of Metallurgical Coal Used for Steelmaking” (90 Fed. Reg. 22711 (May 29, 2025))), regardless of whether such production occurs inside or outside of the United States.
[struck: (S)] [inserted: (U)] Neodymium Neodymium which is—
(i) converted to neodymium-praseodymium oxide which is purified to a minimum purity of 99 percent neodymium-praseodymium oxide by mass,
(ii) converted to neodymium oxide which is purified to a minimum purity of 99.5 percent neodymium oxide by mass2
(iii) purified to a minimum purity of 99.9 percent neodymium by mass.
[struck: (T)] [inserted: (V)] Nickel Nickel which is—
(i) converted to nickel sulphate, or
(ii) purified to a minimum purity of 99 percent nickel by mass.
[struck: (U)] [inserted: (W)] Niobium Niobium which is—
(i) converted to ferronibium, or
(ii) purified to a minimum purity of 99 percent niobium by mass.
[struck: (V)] [inserted: (X)] Tellurium Tellurium which is—
(i) converted to cadmium telluride, or
(ii) purified to a minimum purity of 99 percent tellurium by mass.
[struck: (W)] [inserted: (Y)] Tin Tin which is purified to low alpha emitting tin which—
(i) has a purity of greater than 99.99 percent by mass, and
(ii) possesses an alpha emission rate of not greater than 0.01 counts per hour per centimeter square.
[struck: (X)] [inserted: (Z)] Tungsten[inserted: .—] [inserted: Tungsten which is—]
(i) [inserted: converted to tungsten master alloy,]
(ii) [inserted: converted to ammonium paratungstate, ferrotungsten, tungsten trioxide, or tungsten carbide, or]
(iii) [inserted: purified to a minimum purity of 85 percent tungsten by mass.]
[struck: Tungsten which is converted to ammonium paratungstate or ferrotungsten.]
[struck: (Y)] [inserted: ([)] Vanadium[inserted: .—] [inserted: Vanadium which is—]
(i) [inserted: converted to vanadium master alloy,]
(ii) [inserted: converted to ferrovanadium or vanadium pentoxide, or]
(iii) [inserted: purified to a minimum purity of 85 percent vanadium by mass.]
[struck: Vanadium which is converted to ferrovanadium or vanadium pentoxide.]
[struck: (Z)] [inserted: (\)] Yttrium Yttrium which is—
(i) converted to yttrium oxide which is purified to a minimum purity of 99.999 percent yttrium oxide by mass, or
(ii) purified to a minimum purity of 99.9 percent yttrium by mass.
[struck: (AA)] [inserted: (])] Other minerals Any of the following minerals, provided that such mineral is purified to a minimum purity of 99 percent by mass:
(i) Arsenic.
(ii) Bismuth.
(iii) [inserted: Deuterium.]
[struck: (iii)] [inserted: (iv)] Erbium.
[struck: (iv)] [inserted: (v)] Gallium.
[struck: (v)] [inserted: (vi)] Hafnium.
[struck: (vi)] [inserted: (vii)] Holmium.
(viii) [inserted: Helium–3.]
[struck: (vii)] [struck: Iridium.]
[struck: (xix)] [struck: Tantalum.]
[struck: (xx)] [struck: Terbium.]
[struck: (xxi)] [struck: Thulium.]
[struck: (xxii)] [inserted: (ix)] [struck: Titanium][inserted: Iridium].
[struck: (viii)] [inserted: (x)] Lanthanum.
[struck: (ix)] [inserted: (xi)] Lutetium.
[struck: (x)] [inserted: (xii)] Magnesium.
[struck: (xi)] [inserted: (xiii)] Palladium.
[struck: (xii)] [inserted: (xiv)] Platinum.
[struck: (xiii)] [inserted: (xv)] Praseodymium.
[struck: (xiv)] [inserted: (xvi)] Rhodium.
[struck: (xv)] [inserted: (xvii)] Rubidium.
[struck: (xvi)] [inserted: (xviii)] Ruthenium.
[struck: (xvii)] [inserted: (xix)] Samarium.
[struck: (xviii)] [inserted: (xx)] Scandium.
(ix) [inserted: Tantalum.]
(ix) [inserted: Terbium.]
(ix) [inserted: Thulium.]
(ix) [inserted: Titanium.]
(xxiii) Ytterbium.
(xxiv) Zinc.
(xxv) [struck: Zirconium][inserted: Tritium].
(xxv) [inserted: Zirconium.]
(d) Special rules In this section—
(1) Related persons Persons shall be treated as related to each other if such persons would be treated as a single employer under the regulations prescribed under section 52(b).
Rest of § 45X unchanged ·