Skip to content
The People's CodeSearch
Menu

Changes to the Code

H.R. 8059 · Unserialized Firearm Harm Oversight and Serialization Act of 2026 ·

In committee · step 2 of 5

Sections are cited like “7 U.S.C. § 2012”: 7 of the , 2012.

18 U.S.C. § 921 Definitions

+4 −01 of 2 shown
More for 18 U.S.C. § 921
Read § 921Only this section
2 changes the bill asks for here, 1 carried out
  1. Not carried out:

    Section 921(a)(3)(A) of title 18, United States Code, is amended by inserting , and any combination of parts which is clearly intended to function, or may readily be converted, before to expel a projectile.

    The bill points to (A) in § 921(a)(3), which isn't there in the Code as we have it. It may have been renumbered or removed since the bill was drafted.

    Technical detailtarget not found: no level (A) under /us/usc/t18/s921/a/3
  2. Carried out:

    Section 921(a) of such title is amended by adding at the end the following:(39) The term “additive manufacturing” means a process of joining materials to make objects from 3-dimensional model data, usually layer upon layer, including powder bed fusion, material extrusion, directed energy deposition, vat photopolymerization, and binder jetting. (40) The …

§ 921(a)–(b)

Start of § 921 to (a)(38)(B) unchanged ·

(i) the receipt of the communication; and

(ii) the electronic communication address to which the communication is sent.

(39) [inserted: The term “additive manufacturing” means a process of joining materials to make objects from 3-dimensional model data, usually layer upon layer, including powder bed fusion, material extrusion, directed energy deposition, vat photopolymerization, and binder jetting.]

(40) [inserted: The term “non-traditional manufacturing method” means any process of producing a firearm, frame, or receiver outside of conventional manufacturing, including additive manufacturing, digital fabrication, or other emerging technologies.]

(b) For the purposes of this chapter, a member of the Armed Forces on active duty is a resident of the State in which his permanent duty station is located.

18 U.S.C. § 923 Licensing

+11 −13 of 4 shown
More for 18 U.S.C. § 923
Read § 923Only this section
4 changes the bill asks for here, 3 carried out
  1. Carried out:

    by inserting (1) after (i); and

  2. Not carried out:

    by adding after and below the end the following:(2) A person licensed under this section who produces or completes a frame or receiver for a firearm, or a collection of parts that, with other readily available parts, could be used to produce a firearm, through additive manufacturing or any other process involving the use of a …

    We can't read how this instruction is worded yet, so it isn't shown in the text.

    Technical detailno-pattern: adding after and below the end the following: QCONTENT.
  3. Carried out:

    Section 923(i) of title 18, United States Code, as amended by section 3(a) of this Act, is amended by adding at the end the following:(3) A person licensed under this section who receives a firearm that does not have a serial number engraved or cast on the receiver or frame of the firearm shall— (A) engrave or cast a serial number on the receiver or frame of the firearm, in such manner as the Attorney General …

  4. Carried out:

    Section 923(i) of such title, as amended by section 3(a) of this Act and subsection (a) of this section, is amended by adding at the end the following:(4) The Attorney General may use information in a record transmitted under paragraph (3)(B) of this subsection only in the course of an ongoing bona fide criminal investigation. The 2nd sentence of section 926(a) shall not apply with respect to the information in any such record..

§ 923(h)–(l)

Start of § 923 to (g)(7) unchanged ·

(h) Licenses issued under the provisions of subsection (c) of this section shall be kept posted and kept available for inspection on the premises covered by the license.

(i) [inserted: (1) ]Licensed importers and licensed manufacturers shall identify by means of a serial number engraved or cast on the receiver or frame of the weapon, in such manner as the Attorney General shall by regulations prescribe, each firearm imported or manufactured by such importer or manufacturer.

(3) [inserted: A person licensed under this section who receives a firearm that does not have a serial number engraved or cast on the receiver or frame of the firearm shall—]

(A) [inserted: engrave or cast a serial number on the receiver or frame of the firearm, in such manner as the Attorney General shall by regulations prescribe;]

(B) [inserted: transmit to the Attorney General a record of the receipt, which shall set forth the serial number; and]

(C) [inserted: keep and maintain a copy of the record.]

(4) [inserted: The Attorney General may use information in a record transmitted under paragraph (3)(B) of this subsection only in the course of an ongoing bona fide criminal investigation. The 2nd sentence of section 926(a) shall not apply with respect to the information in any such record.]

(j) A licensed importer, licensed manufacturer, or licensed dealer may, under rules or regulations prescribed by the Attorney General, conduct business temporarily at a location other than the location specified on the license if such temporary location is the location for a gun show or event sponsored by any national, State, or local organization, or any affiliate of any such organization devoted to the collection, competitive use, or other sporting use of firearms in the community, and such location is in the State which is specified on the license. Records of receipt and disposition of firearms transactions conducted at such temporary location shall include the location of the sale or other disposition and shall be entered in the permanent records of the licensee and retained on the location specified on the license. Nothing in this subsection shall authorize any licensee to conduct business in or from any motorized or towed vehicle. Notwithstanding the provisions of subsection (a) of this section, a separate fee shall not be required of a licensee with respect to business conducted under this subsection. Any inspection or examination of inventory or records under this chapter by the Attorney General at such temporary location shall be limited to inventory consisting of, or records relating to, firearms held or disposed at such temporary location. Nothing in this subsection shall be construed to authorize the Attorney General to inspect or examine the inventory or records of a licensed importer, licensed manufacturer, or licensed dealer at any location other than the location specified on the license. Nothing in this subsection shall be construed to diminish in any manner any right to display, sell, or otherwise dispose of firearms or ammunition, which is in effect before the date of the enactment of the Firearms Owners’ Protection Act, including the right of a licensee to conduct “curios or relics” firearms transfers and business away from their business premises with another licensee without regard as to whether the location of where the business is conducted is located in the State specified on the license of either licensee.

(k) Licensed importers and licensed manufacturers shall mark all armor piercing projectiles and packages containing such projectiles for distribution in the manner prescribed by the Attorney General by regulation. The Attorney General shall furnish information to each dealer licensed under this chapter defining which projectiles are considered armor piercing ammunition as defined in section 921(a)(17)(B).

(l) The Attorney General shall notify the chief law enforcement officer in the appropriate State and local jurisdictions of the names and addresses of all persons in the State to whom a firearms license is issued.

18 U.S.C. § 924 Penalties

+5 −0Shown
More for 18 U.S.C. § 924
Read § 924Only this section
1 change the bill asks for here, 1 carried out
  1. Carried out:

    Section 924 of such title is amended by adding at the end the following:(q) Penalties relating to requirement that firearms produced through additive manufacturing have serial numbers.— (1) Civil penalty for 1st offense.— Whoever knowingly violates section 923(i)(2) shall be subject to a civil penalty of not more than $10,000. (2) Criminal penalties …

§ 924(p)–(q)

Start of § 924 to (p)(1)(A)(ii) unchanged ·

(B) Review.— An action of the Secretary under this paragraph may be reviewed only as provided under section 923(f).

(2) Administrative remedies.— The suspension or revocation of a license or the imposition of a civil penalty under paragraph (1) shall not preclude any administrative remedy that is otherwise available to the Secretary.

(q) [inserted: Penalties relating to requirement that firearms produced through additive manufacturing have serial numbers.—]

(1) [inserted: Civil penalty for 1st offense.—] [inserted: Whoever knowingly violates section 923(i)(2) shall be subject to a civil penalty of not more than $10,000.]

(2) [inserted: Criminal penalties for subsequent offense.—] [inserted: Whoever, having been convicted of violating section 923(i)(2), willfully violates such section shall be fined not more than $100,000, imprisoned not less than 1 year, or both.]

26 U.S.C. § 38 General business credit

+4 −2Shown
More for 26 U.S.C. § 38
Read § 38Only this section
3 changes the bill asks for here, 3 carried out
  1. Carried out:

    Section 38(b) of such Code is amended by striking plus at the end of paragraph (40), by striking the period at the end of paragraph (41) and inserting , plus, and by adding at the end the following new paragraph:(42) the firearm dealer serialization credit determined under section 45BB(a)..

  2. Carried out:

    Section 38(b) of such Code is amended by striking plus at the end of paragraph (40), by striking the period at the end of paragraph (41) and inserting , plus, and by adding at the end the following new paragraph:(42) the firearm dealer serialization credit determined under section 45BB(a)..

  3. Carried out:

    Section 38(b) of such Code is amended by striking plus at the end of paragraph (40), by striking the period at the end of paragraph (41) and inserting , plus, and by adding at the end the following new paragraph:(42) the firearm dealer serialization credit determined under section 45BB(a)..

§ 38(b)–(c)

Start of § 38 to (b)(38) unchanged ·

(39) the clean electricity production credit determined under section 45Y(a),

(40) the clean fuel production credit determined under section 45Z(a),[struck: plus]

(41) in the case of an eligible small employer (as defined in section 45AA(c)), the military spouse retirement plan eligibility credit determined under section 45AA(a)[struck: .][inserted: , plus]

(42) [inserted: the firearm dealer serialization credit determined under section 45BB(a).]

(c) Limitation based on amount of tax

(1) In general The credit allowed under subsection (a) for any taxable year shall not exceed the excess (if any) of the taxpayer’s net income tax over the greater of—

Rest of § 38 unchanged ·

26 U.S.C. § 45BB Firearm dealer serialization credit New section

+27 −0Shown
More for 26 U.S.C. § 45BB
1 change the bill asks for here, 1 carried out
  1. Carried out:

    Subpart D of part IV of subchapter A of chapter 1 of the Internal Revenue Code of 1986 is amended by adding at the end the following new section:45BB. Firearm dealer serialization credit (a) In general.— For purposes of section 38, in the case of a taxpayer who is licensed under section 923 of title 18, United States Code, to engage in the business of importing, manufacturing, or dealing in firearms, the firearm dealer serialization credit determined under this section for the taxable year shall be an amount equal to the firearm serialization expenditures of the taxpayer for the taxable year. (b) Firearm serialization expenditures.— For purposes of this section, the term firearm serialization expenditures means any amounts paid or incurred during the taxable year to comply with section 923(i)(3) of title 18, United States Code, including the purchase or lease of equipment (or related software) for the engraving or casting of firearms. (c) Limitation.— The amount of firearm serialization expenditures taken into account by the taxpayer under subsection (a) for any taxable year shall not exceed— (1) in the case of amounts paid or incurred for the purchase or lease of equipment (or related software) for engraving or casting firearm receivers or frames, $1,000, and (2) in the case of any other expenditures, the lesser of— (A) an amount that does not exceed $50 for each firearm the engraving or casting of which is required of the taxpayer under section 923(i)(3) of title 18, United States Code, or (B) $1,500. (d) Controlled groups.— Rules similar to the rules of paragraphs (1) and (2) of section 41(f) shall apply for purposes of this section. (e) Denial of double benefit.— (1) No deduction.— No deduction shall be allowed for any expenditures taken into account in determining the credit under this section for the taxable year. (2) Basis adjustment.— If a credit is determined under this section with respect to any property purchased by the taxpayer, the basis of such property shall be reduced by the amount of the credit so determined with respect to such property. (f) Termination.— (1) In general.— Except to the extent provided in paragraph (2), this section shall not apply to any amount paid or incurred more than 5 years after the date of the enactment of this section. (2) Extension.— If the Secretary (after consultation with the Director of the Bureau of Alcohol, Tobacco, Firearms and Explosives) certifies to Congress that the credit allowed under this section has improved firearm serialization and compliance with related Federal law, paragraph (1) shall be applied by substituting 7 years for 5 years..

§ 45BB(a)–(f)

§ 45BB. [inserted: Firearm dealer serialization credit]

(a) [inserted: In general.—] [inserted: For purposes of section 38, in the case of a taxpayer who is licensed under section 923 of title 18, United States Code, to engage in the business of importing, manufacturing, or dealing in firearms, the firearm dealer serialization credit determined under this section for the taxable year shall be an amount equal to the firearm serialization expenditures of the taxpayer for the taxable year.]

(b) [inserted: Firearm serialization expenditures.—] [inserted: For purposes of this section, the term “firearm serialization expenditures” means any amounts paid or incurred during the taxable year to comply with section 923(i)(3) of title 18, United States Code, including the purchase or lease of equipment (or related software) for the engraving or casting of firearms.]

(c) [inserted: Limitation.—] [inserted: The amount of firearm serialization expenditures taken into account by the taxpayer under subsection (a) for any taxable year shall not exceed—]

(1) [inserted: in the case of amounts paid or incurred for the purchase or lease of equipment (or related software) for engraving or casting firearm receivers or frames, $1,000, and]

(2) [inserted: in the case of any other expenditures, the lesser of—]

(A) [inserted: an amount that does not exceed $50 for each firearm the engraving or casting of which is required of the taxpayer under section 923(i)(3) of title 18, United States Code, or]

(B) [inserted: $1,500.]

(d) [inserted: Controlled groups.—] [inserted: Rules similar to the rules of paragraphs (1) and (2) of section 41(f) shall apply for purposes of this section.]

(e) [inserted: Denial of double benefit.—]

(1) [inserted: No deduction.—] [inserted: No deduction shall be allowed for any expenditures taken into account in determining the credit under this section for the taxable year.]

(2) [inserted: Basis adjustment.—] [inserted: If a credit is determined under this section with respect to any property purchased by the taxpayer, the basis of such property shall be reduced by the amount of the credit so determined with respect to such property.]

(f) [inserted: Termination.—]

(1) [inserted: In general.—] [inserted: Except to the extent provided in paragraph (2), this section shall not apply to any amount paid or incurred more than 5 years after the date of the enactment of this section.]

(2) [inserted: Extension.—] [inserted: If the Secretary (after consultation with the Director of the Bureau of Alcohol, Tobacco, Firearms and Explosives) certifies to Congress that the credit allowed under this section has improved firearm serialization and compliance with related Federal law, paragraph (1) shall be applied by substituting “7 years” for “5 years”.]

Step through the changes