Changes to the Code
S. 2183 · Community Wood Facilities Assistance Act of 2025 · Introduced The text as a member of Congress first filed it. Most bills never get further than this.
In committee · step 2 of 5
7 U.S.C. § 7655d Wood innovation grant program
4 changes the bill asks for here, 3 carried out
- Not carried out:
in the section heading, by striking
Innovation
and insertingInnovations
;“Innovation” isn't in § 7655d in the Code as we have it. The law may have changed since the bill was drafted.
Technical detail
“Innovation” not found in /us/usc/t7/s7655d - Carried out:
in the subsection heading, by striking
Incentivizing use of existing milling
and insertingExpanding forest products manufacturing
; and - Carried out:
by striking
use or retrofitting (or both) of existing sawmill
and insertingconstruction, use, or retrofitting for forest products manufacturing
; and - Carried out:
in subsection (d), by inserting
50 percent of
beforethe amount
.
§ 7655d(b)–(d)
Start of § 7655d to (b) unchanged ·
(1) In general The Secretary, in carrying out the wood innovation grant program of the Secretary described in the notice of the Secretary entitled “Request for Proposals: 2016 Wood Innovations Funding Opportunity” (80 Fed. Reg. 63498 (October 20, 2015)), may make a wood innovation grant to 1 or more eligible entities each year for the purpose of advancing the use of innovative wood products.
(2) Proposals To be eligible to receive a grant under this subsection, an eligible entity shall submit to the Secretary a proposal at such time, in such manner, and containing such information as the Secretary may require.
(c) [struck: Incentivizing][inserted: Expanding] [struck: use][inserted: forest] [struck: of][inserted: products] [struck: existing][inserted: manufacturing] [struck: milling ]capacity In selecting among proposals of eligible entities under subsection (b)(2), the Secretary shall give priority to proposals that include the [inserted: construction, ]use[inserted: ,] or retrofitting [struck: (or][inserted: for] [struck: both)][inserted: forest] [struck: of][inserted: products] [struck: existing][inserted: manufacturing] [struck: sawmill ]facilities located in counties in which the average annual unemployment rate exceeded the national average unemployment rate by more than 1 percent in the previous calendar year.
(d) Matching requirement As a condition of receiving a grant under subsection (b), an eligible entity shall provide funds equal to [inserted: 50 percent of ]the amount received by the eligible entity under the grant, to be derived from non-Federal sources.
7 U.S.C. § 8113 Community Wood Energy and Wood Innovation Program
17 changes the bill asks for here, 16 carried out
- Carried out:
in the section heading, by striking
Energy and Wood Innovation
and insertingFacilities Grant
; - Carried out:
in paragraph (1)(A)(iii), in the matter preceding subclause (I), by striking
woody biomass, including
and insertingprimarily forest biomass, including processing or manufacturing
; and - Carried out:
in paragraph (4), by striking
Energy and Wood Innovation
and insertingFacilities Grant
; - Carried out:
in subsection (b), by striking
Energy and Wood Innovation
and insertingFacilities Grant
; - Carried out:
in paragraph (1), by striking
35
and inserting50
; - Carried out:
by striking paragraph (2); and
- Carried out:
by redesignating paragraph (3) as paragraph (2);
- Not carried out:
in subsection (d), by striking
exceed—
in the matter preceding paragraph (1) and all that follows through the period at the end of paragraph (2) and insertingexceed $5,000,000.
;“exceed—” isn't in § 8113(d)(2) in the Code as we have it. The law may have changed since the bill was drafted.
Technical detail
“exceed—” not found in /us/usc/t7/s8113/d/2 - Carried out:
by striking paragraph (1);
- Carried out:
by redesignating paragraphs (2) through (8) as paragraphs (1) through (7), respectively; and
- Carried out:
in paragraph (1) (as so redesignated), by inserting
or market competitiveness
aftercost effectiveness
; - Carried out:
by striking paragraph (2);
- Carried out:
by redesignating paragraphs (3) and (4) as paragraphs (2) and (3), respectively; and
- Carried out:
in paragraph (2) (as so redesignated), by striking
use or retrofitting (or both) of existing sawmill
and insertingconstruction, use, or retrofitting of forest products manufacturing
; - Carried out:
in paragraph (1), by striking
5 megawatts of thermal energy or combined thermal and electric energy
and inserting15 megawatts of thermal energy
; and - Carried out:
in paragraph (2), by striking
25 percent
and inserting50 percent
; and - Carried out:
in subsection (h), by striking
$25,000,000 for each of fiscal years 2019 through 2023
and inserting$50,000,000 for each of fiscal years 2026 through 2030
.
§ 8113(a)
§ 8113. Community Wood [struck: Energy][inserted: Facilities] [struck: and][inserted: Grant] [struck: Wood Innovation ]Program
(a) Definitions In this section:
(1) Community wood energy system
§ 8113(a)(1)(A)In general(ii)–(iii)
(a)(1)(A) unchanged ·
(ii) services public facilities owned or operated by State or local governments (including schools, town halls, libraries, and other public buildings) or private or nonprofit facilities (including commercial and business facilities, such as hospitals, office buildings, apartment buildings, and manufacturing and industrial buildings); and
(iii) uses [struck: woody][inserted: primarily] [inserted: forest ]biomass, including [inserted: processing or manufacturing ]residuals—
(I) that have not been adulterated with glue or other chemical treatments from wood processing facilities, as the primary fuel; and
(II) for which the use of that biomass for energy production does not cause conversion of forests to nonforest use.
§ 8113(a)–(h)
(a)(1)(B)–(3)(D) unchanged ·
(E) laminated veneer lumber.
(4) Program The term “Program” means the Community Wood [struck: Energy][inserted: Facilities] [struck: and][inserted: Grant] [struck: Wood Innovation ]Program established under subsection (b).
(b) Competitive grant program The Secretary, acting through the Chief of the Forest Service, shall establish a competitive grant program to be known as the “Community Wood [struck: Energy][inserted: Facilities] [struck: and][inserted: Grant] [struck: Wood Innovation ]Program”.
(c) Matching grants
(1) In general Under the Program, the Secretary shall make grants to cover not more than [struck: 35][inserted: 50] percent of the capital cost for installing a community wood energy system or building an innovative wood product facility.
[struck: (2)] [struck: Special circumstances] [struck: The Secretary may establish special circumstances, such as in the case of a community wood energy system project or innovative wood product facility project involving a school or hospital in a low-income community, under which grants under the Program may cover up to 50 percent of the capital cost.]
[struck: (3)] [inserted: (2)] Source of matching funds Matching funds required pursuant to this subsection from a grant recipient shall be derived from non-Federal funds.
(d) Project cap The total amount of grants under the Program for a community wood energy system project or innovative wood product facility project may not exceed—
(1) in the case of grants under the general authority provided under subsection (c)(1), $1,000,000; and
(2) in the case of grants for which the special circumstances apply under subsection (c)(2), $1,500,000.
(e) Selection criteria In selecting applicants for grants under the Program, the Secretary shall consider the following:
[struck: (1)] [struck: The energy efficiency of the proposed community wood energy system or innovative wood product facility.]
[struck: (2)] [inserted: (1)] The cost effectiveness [inserted: or market competitiveness ]of the proposed community wood energy system or innovative wood product facility.
[struck: (3)] [inserted: (2)] The extent to which the proposed community wood energy system or innovative wood product facility represents the best available commercial technology.
[struck: (4)] [inserted: (3)] The extent to which the proposed community wood energy system uses the most stringent control technology that has been required or achieved in practice for a wood-fired boiler of similar size and type.
[struck: (5)] [inserted: (4)]
(A) The extent to which the proposed community wood energy system will displace conventional fossil fuel generation.
(B) Whether the proposed community wood energy system minimizes emission increases to the greatest extent possible.
[struck: (6)] [inserted: (5)] The extent to which the proposed community wood energy system will increase delivered thermal efficiency of the systems replaced.
[struck: (7)] [inserted: (6)] The extent to which the applicant has demonstrated a high likelihood of project success by completing detailed engineering and design work in advance of the grant application.
[struck: (8)] [inserted: (7)] Other technical, economic, conservation, and environmental criteria that the Secretary considers appropriate.
(f) Grant priorities In selecting applicants for grants under the Program, the Secretary shall give priority to proposals that use the most stringent control technology that has been required or achieved in practice for a wood-fired boiler and—
(1) would be carried out in a location where markets are needed for the low-value, low-quality wood;
[struck: (2)] [struck: would be carried out in a location with limited access to natural gas pipelines;]
[struck: (3)] [inserted: (2)] would include the [inserted: construction, ]use[inserted: ,] or retrofitting [struck: (or both) ]of [struck: existing][inserted: forest] [struck: sawmill][inserted: products] [inserted: manufacturing ]facilities located in a location where the average annual unemployment rate exceeded the national average unemployment rate by more than 1 percent during the previous calendar year; or
[struck: (4)] [inserted: (3)] would be carried out in a location where the project will aid with forest restoration.
(g) Limitations
(1) Capacity of community wood energy systems A community wood energy system acquired with grant funds under the Program shall not exceed nameplate capacity of [struck: 5][inserted: 15] megawatts of thermal energy[struck: or combined thermal and electric energy].
(2) Funding for innovative wood product facilities Not more than [struck: 25][inserted: 50] percent of funds provided as grants under the Program for a fiscal year may go to applicants proposing innovative wood product facilities, unless the Secretary has received an insufficient number of qualified proposals for community wood energy systems.
(h) Funding There is authorized to be appropriated to carry out the Program $[struck: 25][inserted: 50],000,000 for each of fiscal years [struck: 2019][inserted: 2026] through [struck: 2023][inserted: 2030].