Changes to the Code
S. 2238 · PART Act · Introduced The text as a member of Congress first filed it. Most bills never get further than this.
In committee · step 2 of 5
18 U.S.C. § 671 Theft of catalytic converters New section
1 change the bill asks for here, 1 carried out
- Carried out:
by adding at the end the following:671. Theft of catalytic converters (a) Definitions.— In this section: (1) Catalytic converter.— The term
catalytic converter
means any of the following: (A) Any device installed in the exhaust system of an internal combustion engine that utilizes catalytic action to oxidize hydrocarbon (HC) and carbon monoxide (CO) emissions to carbon dioxide (CO2) and water (H2O). (B) A diesel oxidation catalyst. (C) A diesel particulate filter. (2) Precious metals.— The termprecious metals
has the meaning given the term in section 109–27.5101 of title 41, Code of Federal Regulations, or any successor regulation. (b) Offense.— It shall be unlawful to steal or knowingly and unlawfully take, carry away, or conceal a catalytic converter from another person’s motor vehicle, or knowingly purchase such a catalytic converter, with the intent to distribute, sell, or dispose of the catalytic converter or any precious metal removed therefrom in interstate or foreign commerce. (c) Penalty.— (1) In general.— Any person who violates subsection (b) shall be fined under this title, imprisoned not more than 5 years, or both. (2) Concurrent sentences.— Any term of imprisonment imposed on a person under paragraph (1) shall run concurrently with any other term of imprisonment imposed on the person at the same time for an offense arising out of the same conduct.; and
§ 671(a)–(c)
§ 671. [inserted: Theft of catalytic converters]
(a) [inserted: Definitions.—] [inserted: In this section:]
(1) [inserted: Catalytic converter.—] [inserted: The term “catalytic converter” means any of the following:]
(A) [inserted: Any device installed in the exhaust system of an internal combustion engine that utilizes catalytic action to oxidize hydrocarbon (HC) and carbon monoxide (CO) emissions to carbon dioxide (CO2) and water (H2O).]
(B) [inserted: A diesel oxidation catalyst.]
(C) [inserted: A diesel particulate filter.]
(2) [inserted: Precious metals.—] [inserted: The term “precious metals” has the meaning given the term in section 109–27.5101 of title 41, Code of Federal Regulations, or any successor regulation.]
(b) [inserted: Offense.—] [inserted: It shall be unlawful to steal or knowingly and unlawfully take, carry away, or conceal a catalytic converter from another person’s motor vehicle, or knowingly purchase such a catalytic converter, with the intent to distribute, sell, or dispose of the catalytic converter or any precious metal removed therefrom in interstate or foreign commerce.]
(c) [inserted: Penalty.—]
(1) [inserted: In general.—] [inserted: Any person who violates subsection (b) shall be fined under this title, imprisoned not more than 5 years, or both.]
(2) [inserted: Concurrent sentences.—] [inserted: Any term of imprisonment imposed on a person under paragraph (1) shall run concurrently with any other term of imprisonment imposed on the person at the same time for an offense arising out of the same conduct.]
18 U.S.C. § 2321 Trafficking in certain motor vehicles or motor vehicle parts
1 change the bill asks for here, 1 carried out
- Carried out:
Section 2321 of title 18, United States Code, is amended by adding at the end the following:
(d) Trafficking in motor vehicle parts containing precious metals.— (1) Definition of catalytic converter.— In this subsection, the term “catalytic converter” means any of the following: (A) Any device installed in the exhaust system of an internal combustion engine that …
§ 2321(b)–(d)
Start of § 2321 to (b)(1) unchanged ·
(2) is not a violation of section 511 of this title.
(c) As used in this section, the terms “identification number” and “motor vehicle” have the meaning given those terms in section 511 of this title.
(d) [inserted: Trafficking in motor vehicle parts containing precious metals.—]
(1) [inserted: Definition of catalytic converter.—] [inserted: In this subsection, the term “catalytic converter” means any of the following:]
(A) [inserted: Any device installed in the exhaust system of an internal combustion engine that utilizes catalytic action to oxidize hydrocarbon (HC) and carbon monoxide (CO) emissions to carbon dioxide (CO2) and water (H2O).]
(B) [inserted: A diesel oxidation catalyst.]
(C) [inserted: A diesel particulate filter.]
(2) [inserted: Offense.—] [inserted: It shall be unlawful to buy, receive, possess, or obtain control of, with intent to sell or otherwise dispose of, a catalytic converter, knowing that the catalytic converter has been stolen.]
(3) [inserted: Penalty.—]
(A) [inserted: In general.—] [inserted: Subject to subparagraph (B), any person who violates paragraph (2) shall be fined under this title, imprisoned not more than 5 years, or both.]
(B) [inserted: Concurrent sentences.—] [inserted: Any term of imprisonment imposed on a person under subparagraph (A) shall run concurrently with any other term of imprisonment imposed on the person at the same time for an offense arising out of the same conduct.]
18 U.S.C. § 2322 Chop shops
1 change the bill asks for here, 1 carried out
- Carried out:
Section 2322(b) of title 18, United States Code, is amended to read as follows:
(b) Definition.— For purposes of this section, the term “chop shop” means any building, lot, facility, or other structure or premise where 1 or more persons engage in receiving, concealing, destroying, disassembling, dismantling, reassembling, or storing any motor vehicle or …
§ 2322(a)–(b)
Start of § 2322 to (a)(1) unchanged ·
(2) Injunctions.— The Attorney General shall, as appropriate, in the case of any person who violates paragraph (1), commence a civil action for permanent or temporary injunction to restrain such violation.
(b) Definition.— For purposes of this section, the term “chop shop” means any building, lot, facility, or other structure or premise where [struck: one][inserted: 1] or more persons engage in receiving, concealing, destroying, disassembling, dismantling, reassembling, or storing any [struck: passenger ]motor vehicle or [struck: passenger ]motor vehicle part [struck: which][inserted: that] has been unlawfully obtained in order to alter, counterfeit, deface, destroy, disguise, falsify, forge, obliterate, [inserted: extract any precious metal therefrom, ]or remove the identity, including the vehicle identification number or derivative thereof, [inserted: or other identification marking, ]of [struck: such][inserted: the] vehicle or vehicle part and to distribute, sell, or dispose of [struck: such][inserted: the] vehicle or vehicle part[inserted: ,] [inserted: or precious metal extracted from the vehicle or vehicle part, ]in interstate or foreign commerce.
49 U.S.C. § 33101 Definitions
8 changes the bill asks for here, 5 carried out
- Not carried out:
by inserting
The term
after the paragraph designation; andWe can't read how this instruction is worded yet, so it isn't shown in the text.
Technical detail
no-pattern: inserting QTEXT after the paragraph designation; and - Not carried out:
by adding a paragraph heading the text of which comprises the term defined in the paragraph;
We can't read how this instruction is worded yet, so it isn't shown in the text.
Technical detail
no-pattern: adding a paragraph heading the text of which comprises the term defined in the paragraph; - Carried out:
by redesignating paragraphs (1) through (11) as paragraphs (2) through (12), respectively; and
- Not carried out:
in the matter preceding paragraph (2) (as so redesignated), by striking chapter— and inserting the following:
“chapter:(1) Catalytic converter.— The term “catalytic converter” means any of the following: (A) Any device installed in the exhaust system of an internal combustion engine that utilizes catalytic action to oxidize hydrocarbon (HC) and carbon monoxide (CO) emissions to carbon …
We can't read how this instruction is worded yet, so it isn't shown in the text.
Technical detail
no-pattern: striking QTEXT and inserting the following: “ chapter: QCONTENT. - Carried out:
in subparagraph (K), by striking
and
after the semicolon at the end;
- Carried out:
by redesignating subparagraph (L) as subparagraph (M);
- Carried out:
by inserting after subparagraph (K) the following:
(L) the catalytic converter; and; and
- Carried out:
in subparagraph (M) (as so redesignated), by striking
subclauses (A)–(K) of this clause
and insertingsubparagraphs (A) through (L) of this paragraph
.
§ 33101(2)–(12)
§ 33101. Definitions
In this chapter—
[struck: (1)] [inserted: (2)] “chop shop” means a building, lot, facility, or other structure or premise at which at least one person engages in receiving, concealing, destroying, disassembling, dismantling, reassembling, or storing a passenger motor vehicle or passenger motor vehicle part that has been unlawfully obtained—
(A) to alter, counterfeit, deface, destroy, disguise, falsify, forge, obliterate, or remove the identity of the vehicle or part, including the vehicle identification number or a derivative of that number; and
(B) to distribute, sell, or dispose of the vehicle or part in interstate or foreign commerce.
[struck: (2)] [inserted: (3)] “covered major part” means a major part selected under section 33104 of this title for coverage by the vehicle theft prevention standard prescribed under section 33102 or 33103 of this title.
[struck: (3)] [inserted: (4)] “existing line” means a line introduced into commerce before January 1, 1990.
[struck: (4)] [inserted: (5)] “first purchaser” means the person making the first purchase other than for resale.
[struck: (5)] [inserted: (6)] “line” means a name that a manufacturer of motor vehicles applies to a group of motor vehicle models of the same make that have the same body or chassis, or otherwise are similar in construction or design.
[struck: (6)] [inserted: (7)] “major part” means—
(A) the engine;
(B) the transmission;
(C) each door to the passenger compartment;
(D) the hood;
(E) the grille;
(F) each bumper;
(G) each front fender;
(H) the deck lid, tailgate, or hatchback;
(I) each rear quarter panel;
(J) the trunk floor pan;
(K) the frame or, for a unitized body, the supporting structure serving as the frame;[struck: and]
(L) [inserted: the catalytic converter; and]
[struck: (L)] [inserted: (M)] any other part of a passenger motor vehicle that the Secretary of Transportation by regulation specifies as comparable in design or function to any of the parts listed in [struck: subclauses][inserted: subparagraphs] (A)[struck: –][inserted: through ]([struck: K][inserted: L]) of this [struck: clause][inserted: paragraph].
[struck: (7)] [inserted: (8)] “major replacement part” means a major part that is—
(A) an original major part in or on a completed motor vehicle and customized or modified after manufacture of the vehicle but before the time of its delivery to the first purchaser; or
(B) not installed in or on a motor vehicle at the time of its delivery to the first purchaser and the equitable or legal title to the vehicle has not been transferred to a first purchaser.
[struck: (8)] [inserted: (9)] “model year” has the same meaning given that term in section 32901(a) of this title.
[struck: (9)] [inserted: (10)] “new line” means a line introduced into commerce after December 31, 1989.
[struck: (10)] [inserted: (11)] “passenger motor vehicle” includes a multipurpose passenger vehicle or light duty truck when that vehicle or truck is rated at not more than 6,000 pounds gross vehicle weight.
[struck: (11)] [inserted: (12)] “vehicle theft prevention standard” means a minimum performance standard for identifying major parts of new motor vehicles and major replacement parts by inscribing or affixing numbers or symbols on those parts.
49 U.S.C. § 33106 Exemption for passenger motor vehicles equipped with anti-theft devices
4 changes the bill asks for here, 4 carried out
- Carried out:
in paragraph (2), by striking
and
at the end; - Carried out:
by redesignating paragraph (3) as paragraph (4); and
- Carried out:
by inserting after paragraph (2) the following:
(3) a certification that the catalytic converter will be marked in accordance with sections 33101 through 33104, including associated regulations; and; and
- Carried out:
by adding at the end the following:
(f) Requirements for marking catalytic converters.— (1) In general.— The Administrator of the National Highway Traffic Safety Administration shall promulgate regulations requiring catalytic converters on a vehicle line to be marked in accordance with sections 33101 through …
§ 33106(c)–(f)
Start of § 33106 to (c) unchanged ·
(1) a detailed description of the device;
(2) the reasons for the manufacturer’s conclusion that the device will be effective in reducing and deterring theft of motor vehicles;[struck: and]
(3) [inserted: a certification that the catalytic converter will be marked in accordance with sections 33101 through 33104, including associated regulations; and]
[struck: (3)] [inserted: (4)] additional information the Secretary reasonably may require to make the decision described in subsection (b)(1) of this section.
(d) Decisions and Approvals.— The Secretary shall make a decision about a petition filed under this section not later than 120 days after the date the petition is filed. A decision approving a petition must be based on substantial evidence. The Secretary may approve a petition in whole or in part. If the Secretary does not make a decision within the 120-day period, the petition shall be deemed to be approved and the manufacturer shall be exempt from the standard for the line covered by the petition for the subsequent model year.
(e) Rescissions.— The Secretary may rescind an exemption if the Secretary decides that the anti-theft device has not been as effective in reducing and deterring motor vehicle theft as compliance with the standard. A rescission may be effective only—
(1) for a model year after the model year in which the rescission occurs; and
(2) at least 6 months after the manufacturer receives written notice of the rescission from the Secretary.
(f) [inserted: Requirements for marking catalytic converters.—]
(1) [inserted: In general.—] [inserted: The Administrator of the National Highway Traffic Safety Administration shall promulgate regulations requiring catalytic converters on a vehicle line to be marked in accordance with sections 33101 through 33104, including associated regulations.]
(2) [inserted: Unique part identification numbers.—] [inserted: In promulgating regulations under paragraph (1), the Administrator of the National Highway Traffic Safety Administration shall allow for a marking described in that paragraph to include a unique part identification number (as defined in section 33111(b)(1)) that is included in a database that is accessible by law enforcement.]
18 U.S.C. § 2311 Definitions
The bill's words for this section
- Not carried out:
Section 2311 of title 18, United States Code, is amended by inserting after for running on land but not on rails; the following:
“Precious metals” has the meaning given the term in section 109–27.5101 of title 41, Code of Federal Regulations, or any successor regulation;.
We can't read how this instruction is worded yet, so it isn't shown in the text.
Technical detail
no-pattern: inserting after QTEXT the following: QCONTENT.