Changes to the Code
S. 803 · Keep Americans Safe Act · Introduced The text as a member of Congress first filed it. Most bills never get further than this.
In committee · step 2 of 5
18 U.S.C. § 921 Definitions
1 change the bill asks for here, 1 carried out
- Carried out:
Section 921(a) of title 18, United States Code, is amended by adding at the end the following:
(38) The term “large capacity ammunition feeding device”— (A) means a magazine, belt, drum, feed strip, helical feeding device, or similar device, including any such device joined or coupled with another in any manner, that has an overall capacity of, or that can be readily …
The section already has a provision under this letter or number, so it would have two.
This bill puts a provision under a letter or number this section already uses, so the section would have two. The law has probably changed since the bill was written.
§ 921(a)–(b)
Start of § 921 to (a)(38)(B) unchanged ·
(i) the receipt of the communication; and
(ii) the electronic communication address to which the communication is sent.
(38) [inserted: The term “large capacity ammunition feeding device”—]
(A) [inserted: means a magazine, belt, drum, feed strip, helical feeding device, or similar device, including any such device joined or coupled with another in any manner, that has an overall capacity of, or that can be readily restored, changed, or converted to accept, more than 10 rounds of ammunition; and]
(B) [inserted: does not include an attached tubular device designed to accept, and capable of operating only with, .22 caliber rimfire ammunition.]
(39) [inserted: The term “qualified law enforcement officer” has the meaning given the term in section 926B.]
(b) For the purposes of this chapter, a member of the Armed Forces on active duty is a resident of the State in which his permanent duty station is located.
18 U.S.C. § 922 Unlawful acts
1 change the bill asks for here, 1 carried out
- Carried out:
Section 922 of title 18, United States Code, is amended by inserting after subsection (u) the following:
(v) (1) It shall be unlawful for a person to import, sell, manufacture, transfer, or possess, in or affecting interstate or foreign commerce, a large capacity ammunition feeding device. (2) Paragraph (1) shall not apply to the possession of any large capacity ammunition feeding …
The section already has a provision under this letter or number, so it would have two.
This bill puts a provision under a letter or number this section already uses, so the section would have two. The law has probably changed since the bill was written.
§ 922(t)–(x)
Start of § 922 to (t)(6)(A) unchanged ·
(B) for preventing such a sale or transfer to a person who may lawfully receive or possess a firearm.
(u) It shall be unlawful for a person to steal or unlawfully take or carry away from the person or the premises of a person who is licensed to engage in the business of importing, manufacturing, or dealing in firearms, any firearm in the licensee’s business inventory that has been shipped or transported in interstate or foreign commerce.
(v)
(1) [inserted: It shall be unlawful for a person to import, sell, manufacture, transfer, or possess, in or affecting interstate or foreign commerce, a large capacity ammunition feeding device.]
(2) [inserted: Paragraph (1) shall not apply to the possession of any large capacity ammunition feeding device otherwise lawfully possessed on or before the date of enactment of the Keep Americans Safe Act.]
(3) [inserted: Paragraph (1) shall not apply to—]
(A) [inserted: the importation for, manufacture for, sale to, transfer to, or possession by the United States or a department or agency of the United States or a State or a department, agency, or political subdivision of a State, or a sale or transfer to or possession by a qualified law enforcement officer employed by the United States or a department or agency of the United States or a State or a department, agency, or political subdivision of a State for purposes of law enforcement (whether on or off-duty), or a sale or transfer to or possession by a campus law enforcement officer for purposes of law enforcement (whether on or off-duty);]
(B) [inserted: the importation for, or sale or transfer to a licensee under title I of the Atomic Energy Act of 1954 (42 U.S.C. 2011 et seq.) for purposes of establishing and maintaining an on-site physical protection system and security organization required by Federal law, or possession by an employee or contractor of such licensee on-site for such purposes or off-site for purposes of licensee-authorized training or transportation of nuclear materials;]
(C) [inserted: the possession, by an individual who is retired in good standing from service with a law enforcement agency and is not otherwise prohibited from receiving ammunition, of a large capacity ammunition feeding device—]
(i) [inserted: sold or transferred to the individual by the agency upon such retirement; or]
(ii) [inserted: that the individual purchased, or otherwise obtained, for official use before such retirement; or]
(D) [inserted: the importation, sale, manufacture, transfer, or possession of any large capacity ammunition feeding device by a licensed manufacturer or licensed importer for the purposes of testing or experimentation authorized by the Attorney General.]
(4) [inserted: For purposes of paragraph (3)(A), the term “campus law enforcement officer” means an individual who is—]
(A) [inserted: employed by a private institution of higher education that is eligible for funding under title IV of the Higher Education Act of 1965 (20 U.S.C. 1070 et seq.);]
(B) [inserted: responsible for the prevention or investigation of crime involving injury to persons or property, including apprehension or detention of persons for such crimes;]
(C) [inserted: authorized by Federal, State, or local law to carry a firearm, execute search warrants, and make arrests; and]
(D) [inserted: recognized, commissioned, or certified by a government entity as a law enforcement officer.]
[(v) , (w) Repealed. Pub. L. 103–322, title XI, § 110105(2), Sept. 13, 1994, 108 Stat. 2000.]
(x)
Rest of § 922 unchanged ·
18 U.S.C. § 923 Licensing
1 change the bill asks for here, 1 carried out
- Carried out:
Section 923(i) of title 18, United States Code, is amended by adding at the end the following:
A large capacity ammunition feeding device manufactured after the date of enactment of the Keep Americans Safe Act shall be identified by a serial number and the date on which the device was manufactured or made, legibly and conspicuously engraved or cast on the device, and such other identification as the Attorney General shall by regulations prescribe.
.
§ 923(h)–(l)
Start of § 923 to (g)(7) unchanged ·
(h) Licenses issued under the provisions of subsection (c) of this section shall be kept posted and kept available for inspection on the premises covered by the license.
(i) Licensed importers and licensed manufacturers shall identify by means of a serial number engraved or cast on the receiver or frame of the weapon, in such manner as the Attorney General shall by regulations prescribe, each firearm imported or manufactured by such importer or manufacturer.[inserted: A large capacity ammunition feeding device manufactured after the date of enactment of the Keep Americans Safe Act shall be identified by a serial number and the date on which the device was manufactured or made, legibly and conspicuously engraved or cast on the device, and such other identification as the Attorney General shall by regulations prescribe.]
(j) A licensed importer, licensed manufacturer, or licensed dealer may, under rules or regulations prescribed by the Attorney General, conduct business temporarily at a location other than the location specified on the license if such temporary location is the location for a gun show or event sponsored by any national, State, or local organization, or any affiliate of any such organization devoted to the collection, competitive use, or other sporting use of firearms in the community, and such location is in the State which is specified on the license. Records of receipt and disposition of firearms transactions conducted at such temporary location shall include the location of the sale or other disposition and shall be entered in the permanent records of the licensee and retained on the location specified on the license. Nothing in this subsection shall authorize any licensee to conduct business in or from any motorized or towed vehicle. Notwithstanding the provisions of subsection (a) of this section, a separate fee shall not be required of a licensee with respect to business conducted under this subsection. Any inspection or examination of inventory or records under this chapter by the Attorney General at such temporary location shall be limited to inventory consisting of, or records relating to, firearms held or disposed at such temporary location. Nothing in this subsection shall be construed to authorize the Attorney General to inspect or examine the inventory or records of a licensed importer, licensed manufacturer, or licensed dealer at any location other than the location specified on the license. Nothing in this subsection shall be construed to diminish in any manner any right to display, sell, or otherwise dispose of firearms or ammunition, which is in effect before the date of the enactment of the Firearms Owners’ Protection Act, including the right of a licensee to conduct “curios or relics” firearms transfers and business away from their business premises with another licensee without regard as to whether the location of where the business is conducted is located in the State specified on the license of either licensee.
(k) Licensed importers and licensed manufacturers shall mark all armor piercing projectiles and packages containing such projectiles for distribution in the manner prescribed by the Attorney General by regulation. The Attorney General shall furnish information to each dealer licensed under this chapter defining which projectiles are considered armor piercing ammunition as defined in section 921(a)(17)(B).
(l) The Attorney General shall notify the chief law enforcement officer in the appropriate State and local jurisdictions of the names and addresses of all persons in the State to whom a firearms license is issued.
18 U.S.C. § 924 Penalties
8 changes the bill asks for here, 8 carried out
- Carried out:
by striking
Any firearm or ammunition involved in
and insertingAny firearm or ammunition or large capacity ammunition feeding device involved in
; - Carried out:
by striking
or (k)
and inserting(k), or (v)
; and - Carried out:
by striking
any firearm or ammunition intended
and insertingany firearm or ammunition or large capacity ammunition feeding device intended
; and - Carried out:
by inserting
or large capacity ammunition feeding devices
afterfirearms or ammunition
each place the term appears; - Carried out:
in subparagraph (A), by inserting
or large capacity ammunition feeding devices
afterfirearms or ammunition
; and - Carried out:
in subparagraph (C), by inserting
or large capacity ammunition feeding devices
afterfirearms or quantities of ammunition
; and - Carried out:
in paragraph (3)(E), by inserting
922(v),
after922(n),
. - Carried out:
Section 924(a)(1)(B) of title 18, United States Code, is amended by striking
or (q)
and inserting(q), or (v)
.
§ 924(a)(1)Except as otherwise provided in this subsection, subsection (b), (c), (f), or…(A)–(D)
Start of § 924 to (a)(1) unchanged ·
(A) knowingly makes any false statement or representation with respect to the information required by this chapter to be kept in the records of a person licensed under this chapter or in applying for any license or exemption or relief from disability under the provisions of this chapter;
(B) knowingly violates subsection (a)(4), (f), (k), [inserted: (q), ]or ([struck: q][inserted: v]) of section 922;
(C) knowingly imports or brings into the United States or any possession thereof any firearm or ammunition in violation of section 922(l); or
(D) willfully violates any other provision of this chapter,
§ 924(c)–(d)
(a)(1)–(c)(5) unchanged ·
(ii) if the killing is manslaughter (as defined in section 1112), be punished as provided in section 1112.
(d)
(1) Any firearm or ammunition [inserted: or large capacity ammunition feeding device ]involved in or used in any knowing violation of subsection (a)(4), (a)(6), (f), (g), (h), (i), (j), [inserted: (k), ]or ([struck: k][inserted: v]) of section 922, or knowing importation or bringing into the United States or any possession thereof any firearm or ammunition in violation of section 922(l), or knowing violation of section 924, 932, or 933, or willful violation of any other provision of this chapter or any rule or regulation promulgated thereunder, or any violation of any other criminal law of the United States, or any firearm or ammunition [inserted: or large capacity ammunition feeding device ]intended to be used in any offense referred to in paragraph (3) of this subsection, where such intent is demonstrated by clear and convincing evidence, shall be subject to seizure and forfeiture, and all provisions of the Internal Revenue Code of 1986 relating to the seizure, forfeiture, and disposition of firearms, as defined in section 5845(a) of that Code, shall, so far as applicable, extend to seizures and forfeitures under the provisions of this chapter: Provided, That upon acquittal of the owner or possessor, or dismissal of the charges against him other than upon motion of the Government prior to trial, or lapse of or court termination of the restraining order to which he is subject, the seized or relinquished firearms or ammunition [inserted: or large capacity ammunition feeding devices ]shall be returned forthwith to the owner or possessor or to a person delegated by the owner or possessor unless the return of the firearms or ammunition [inserted: or large capacity ammunition feeding devices ]would place the owner or possessor or his delegate in violation of law. Any action or proceeding for the forfeiture of firearms or ammunition [inserted: or large capacity ammunition feeding devices ]shall be commenced within one hundred and twenty days of such seizure.
(2)
(A) In any action or proceeding for the return of firearms or ammunition [inserted: or large capacity ammunition feeding devices ]seized under the provisions of this chapter, the court shall allow the prevailing party, other than the United States, a reasonable attorney’s fee, and the United States shall be liable therefor.
(B) In any other action or proceeding under the provisions of this chapter, the court, when it finds that such action was without foundation, or was initiated vexatiously, frivolously, or in bad faith, shall allow the prevailing party, other than the United States, a reasonable attorney’s fee, and the United States shall be liable therefor.
(C) Only those firearms or quantities of ammunition [inserted: or large capacity ammunition feeding devices ]particularly named and individually identified as involved in or used in any violation of the provisions of this chapter or any rule or regulation issued thereunder, or any other criminal law of the United States or as intended to be used in any offense referred to in paragraph (3) of this subsection, where such intent is demonstrated by clear and convincing evidence, shall be subject to seizure, forfeiture, and disposition.
(D) The United States shall be liable for attorneys’ fees under this paragraph only to the extent provided in advance by appropriation Acts.
(3) The offenses referred to in paragraphs (1) and (2)(C) of this subsection are—
§ 924(d)(3)The offenses referred to in paragraphs (1) and (2)(C) of this subsection…(D)–(G)
(d)(3)(A)–(C) unchanged ·
(D) any offense described in section 922(d) of this title where the firearm or ammunition is intended to be used in such offense by the transferor of such firearm or ammunition;
(E) any offense described in section 922(i), 922(j), 922(l), 922(n), [inserted: 922(v), ]or 924(b) of this title;
(F) any offense which may be prosecuted in a court of the United States which involves the exportation of firearms or ammunition; and
(G) any offense under section 932 or 933.
Rest of § 924 unchanged ·
34 U.S.C. § 10152 Description
1 change the bill asks for here, 1 carried out
- Carried out:
Section 501(a)(1) of title I of the Omnibus Crime Control and Safe Streets Act of 1968 (34 U.S.C. 10152(a)(1)) is amended by adding at the end the following:
(J) Compensation for surrendered large capacity ammunition feeding devices, as that term is defined in section 921 of title 18, United States Code, under buy-back programs for large capacity ammunition feeding devices..
The section already has a provision under this letter or number, so it would have two.
This bill puts a provision under a letter or number this section already uses, so the section would have two. The law has probably changed since the bill was written.
§ 10152(a)–(b)
Start of § 10152 to (a)(1)(I)(iv)(IV) unchanged ·
(J) Programs to purchase and operate unmanned aircraft systems (as defined in section 44801 of title 49) to benefit public safety.
(K) Programs to purchase and operate counter-UAS systems (as defined in section 44801 of title 49) included on the list of technologies established by subsection (d)(2)(A)(iii) section 124n(d)(2)(A)(iii) of title 6 to exercise the authority granted under subsection (a)(2) of such section.
(J) [inserted: Compensation for surrendered large capacity ammunition feeding devices, as that term is defined in section 921 of title 18, United States Code, under buy-back programs for large capacity ammunition feeding devices.]
(2) Rule of construction Paragraph (1) shall be construed to ensure that a grant under that paragraph may be used for any purpose for which a grant was authorized to be used under either or both of the programs specified in section 10151(b) of this title, as those programs were in effect immediately before January 5, 2006.
(b) Contracts and subawards A State or unit of local government may, in using a grant under this part for purposes authorized by subsection (a), use all or a portion of that grant to contract with or make one or more subawards to one or more—
Rest of § 10152 unchanged ·